Weekend batch
Avijeet is a Senior Research Analyst at Simplilearn. Passionate about Data Analytics, Machine Learning, and Deep Learning, Avijeet is also interested in politics, cricket, and football.
Free eBook: Top Programming Languages For A Data Scientist
Normality Test in Minitab: Minitab with Statistics
Machine Learning Career Guide: A Playbook to Becoming a Machine Learning Engineer
Content preview.
Arcu felis bibendum ut tristique et egestas quis:
S.3 hypothesis testing.
In reviewing hypothesis tests, we start first with the general idea. Then, we keep returning to the basic procedures of hypothesis testing, each time adding a little more detail.
The general idea of hypothesis testing involves:
Every hypothesis test — regardless of the population parameter involved — requires the above three steps.
Is normal body temperature really 98.6 degrees f section .
Consider the population of many, many adults. A researcher hypothesized that the average adult body temperature is lower than the often-advertised 98.6 degrees F. That is, the researcher wants an answer to the question: "Is the average adult body temperature 98.6 degrees? Or is it lower?" To answer his research question, the researcher starts by assuming that the average adult body temperature was 98.6 degrees F.
Then, the researcher went out and tried to find evidence that refutes his initial assumption. In doing so, he selects a random sample of 130 adults. The average body temperature of the 130 sampled adults is 98.25 degrees.
Then, the researcher uses the data he collected to make a decision about his initial assumption. It is either likely or unlikely that the researcher would collect the evidence he did given his initial assumption that the average adult body temperature is 98.6 degrees:
In statistics, we generally don't make claims that require us to believe that a very unusual event happened. That is, in the practice of statistics, if the evidence (data) we collected is unlikely in light of the initial assumption, then we reject our initial assumption.
Criminal trial analogy section .
One place where you can consistently see the general idea of hypothesis testing in action is in criminal trials held in the United States. Our criminal justice system assumes "the defendant is innocent until proven guilty." That is, our initial assumption is that the defendant is innocent.
In the practice of statistics, we make our initial assumption when we state our two competing hypotheses -- the null hypothesis ( H 0 ) and the alternative hypothesis ( H A ). Here, our hypotheses are:
In statistics, we always assume the null hypothesis is true . That is, the null hypothesis is always our initial assumption.
The prosecution team then collects evidence — such as finger prints, blood spots, hair samples, carpet fibers, shoe prints, ransom notes, and handwriting samples — with the hopes of finding "sufficient evidence" to make the assumption of innocence refutable.
In statistics, the data are the evidence.
The jury then makes a decision based on the available evidence:
In statistics, we always make one of two decisions. We either "reject the null hypothesis" or we "fail to reject the null hypothesis."
Did you notice the use of the phrase "behave as if" in the previous discussion? We "behave as if" the defendant is guilty; we do not "prove" that the defendant is guilty. And, we "behave as if" the defendant is innocent; we do not "prove" that the defendant is innocent.
This is a very important distinction! We make our decision based on evidence not on 100% guaranteed proof. Again:
We merely state that there is enough evidence to behave one way or the other. This is always true in statistics! Because of this, whatever the decision, there is always a chance that we made an error .
Let's review the two types of errors that can be made in criminal trials:
Jury Decision | Truth | ||
---|---|---|---|
Not Guilty | Guilty | ||
Not Guilty | OK | ERROR | |
Guilty | ERROR | OK |
Table S.3.2 shows how this corresponds to the two types of errors in hypothesis testing.
Decision | |||
---|---|---|---|
Null Hypothesis | Alternative Hypothesis | ||
Do not Reject Null | OK | Type II Error | |
Reject Null | Type I Error | OK |
Note that, in statistics, we call the two types of errors by two different names -- one is called a "Type I error," and the other is called a "Type II error." Here are the formal definitions of the two types of errors:
There is always a chance of making one of these errors. But, a good scientific study will minimize the chance of doing so!
Recall that it is either likely or unlikely that we would observe the evidence we did given our initial assumption. If it is likely , we do not reject the null hypothesis. If it is unlikely , then we reject the null hypothesis in favor of the alternative hypothesis. Effectively, then, making the decision reduces to determining "likely" or "unlikely."
In statistics, there are two ways to determine whether the evidence is likely or unlikely given the initial assumption:
In the next two sections, we review the procedures behind each of these two approaches. To make our review concrete, let's imagine that μ is the average grade point average of all American students who major in mathematics. We first review the critical value approach for conducting each of the following three hypothesis tests about the population mean $\mu$:
: = 3 | : > 3 | |
: = 3 | : < 3 | |
: = 3 | : ≠ 3 |
Upon completing the review of the critical value approach, we review the P -value approach for conducting each of the above three hypothesis tests about the population mean \(\mu\). The procedures that we review here for both approaches easily extend to hypothesis tests about any other population parameter.
Chris Drew (PhD)
Dr. Chris Drew is the founder of the Helpful Professor. He holds a PhD in education and has published over 20 articles in scholarly journals. He is the former editor of the Journal of Learning Development in Higher Education. [Image Descriptor: Photo of Chris]
Learn about our Editorial Process
There are 13 different types of hypothesis. These include simple, complex, null, alternative, composite, directional, non-directional, logical, empirical, statistical, associative, exact, and inexact.
A hypothesis can be categorized into one or more of these types. However, some are mutually exclusive and opposites. Simple and complex hypotheses are mutually exclusive, as are direction and non-direction, and null and alternative hypotheses.
Below I explain each hypothesis in simple terms for absolute beginners. These definitions may be too simple for some, but they’re designed to be clear introductions to the terms to help people wrap their heads around the concepts early on in their education about research methods .
Before you Proceed: Dependent vs Independent Variables
A research study and its hypotheses generally examine the relationships between independent and dependent variables – so you need to know these two concepts:
Read my full article on dependent vs independent variables for more examples.
Example: Eating carrots (independent variable) improves eyesight (dependent variable).
A simple hypothesis is a hypothesis that predicts a correlation between two test variables: an independent and a dependent variable.
This is the easiest and most straightforward type of hypothesis. You simply need to state an expected correlation between the dependant variable and the independent variable.
You do not need to predict causation (see: directional hypothesis). All you would need to do is prove that the two variables are linked.
Question | Simple Hypothesis |
---|---|
Do people over 50 like Coca-Cola more than people under 50? | On average, people over 50 like Coca-Cola more than people under 50. |
According to national registries of car accident data, are Canadians better drivers than Americans? | Canadians are better drivers than Americans. |
Are carpenters more liberal than plumbers? | Carpenters are more liberal than plumbers. |
Do guitarists live longer than pianists? | Guitarists do live longer than pianists. |
Do dogs eat more in summer than winter? | Dogs do eat more in summer than winter. |
A complex hypothesis is a hypothesis that contains multiple variables, making the hypothesis more specific but also harder to prove.
You can have multiple independent and dependant variables in this hypothesis.
Question | Complex Hypothesis |
---|---|
Do (1) age and (2) weight affect chances of getting (3) diabetes and (4) heart disease? | (1) Age and (2) weight increase your chances of getting (3) diabetes and (4) heart disease. |
In the above example, we have multiple independent and dependent variables:
Because there are multiple variables, this study is a lot more complex than a simple hypothesis. It quickly gets much more difficult to prove these hypotheses. This is why undergraduate and first-time researchers are usually encouraged to use simple hypotheses.
A null hypothesis will predict that there will be no significant relationship between the two test variables.
For example, you can say that “The study will show that there is no correlation between marriage and happiness.”
A good way to think about a null hypothesis is to think of it in the same way as “innocent until proven guilty”[1]. Unless you can come up with evidence otherwise, your null hypothesis will stand.
A null hypothesis may also highlight that a correlation will be inconclusive . This means that you can predict that the study will not be able to confirm your results one way or the other. For example, you can say “It is predicted that the study will be unable to confirm a correlation between the two variables due to foreseeable interference by a third variable .”
Beware that an inconclusive null hypothesis may be questioned by your teacher. Why would you conduct a test that you predict will not provide a clear result? Perhaps you should take a closer look at your methodology and re-examine it. Nevertheless, inconclusive null hypotheses can sometimes have merit.
Question | Null Hypothesis (H ) |
---|---|
Do people over 50 like Coca-Cola more than people under 50? | Age has no effect on preference for Coca-Cola. |
Are Canadians better drivers than Americans? | Nationality has no effect on driving ability. |
Are carpenters more liberal than plumbers? | There is no statistically significant difference in political views between carpenters and plumbers. |
Do guitarists live longer than pianists? | There is no statistically significant difference in life expectancy between guitarists and pianists. |
Do dogs eat more in summer than winter? | Time of year has no effect on dogs’ appetites. |
An alternative hypothesis is a hypothesis that is anything other than the null hypothesis. It will disprove the null hypothesis.
We use the symbol H A or H 1 to denote an alternative hypothesis.
The null and alternative hypotheses are usually used together. We will say the null hypothesis is the case where a relationship between two variables is non-existent. The alternative hypothesis is the case where there is a relationship between those two variables.
The following statement is always true: H 0 ≠ H A .
Let’s take the example of the hypothesis: “Does eating oatmeal before an exam impact test scores?”
We can have two hypotheses here:
For the alternative hypothesis to be true, all we have to do is disprove the null hypothesis for the alternative hypothesis to be true. We do not need an exact prediction of how much oatmeal will impact the test scores or even if the impact is positive or negative. So long as the null hypothesis is proven to be false, then the alternative hypothesis is proven to be true.
A composite hypothesis is a hypothesis that does not predict the exact parameters, distribution, or range of the dependent variable.
Often, we would predict an exact outcome. For example: “23 year old men are on average 189cm tall.” Here, we are giving an exact parameter. So, the hypothesis is not composite.
But, often, we cannot exactly hypothesize something. We assume that something will happen, but we’re not exactly sure what. In these cases, we might say: “23 year old men are not on average 189cm tall.”
We haven’t set a distribution range or exact parameters of the average height of 23 year old men. So, we’ve introduced a composite hypothesis as opposed to an exact hypothesis.
Generally, an alternative hypothesis (discussed above) is composite because it is defined as anything except the null hypothesis. This ‘anything except’ does not define parameters or distribution, and therefore it’s an example of a composite hypothesis.
A directional hypothesis makes a prediction about the positivity or negativity of the effect of an intervention prior to the test being conducted.
Instead of being agnostic about whether the effect will be positive or negative, it nominates the effect’s directionality.
We often call this a one-tailed hypothesis (in contrast to a two-tailed or non-directional hypothesis) because, looking at a distribution graph, we’re hypothesizing that the results will lean toward one particular tail on the graph – either the positive or negative.
Question | Directional Hypothesis |
---|---|
Does adding a 10c charge to plastic bags at grocery stores lead to changes in uptake of reusable bags? | Adding a 10c charge to plastic bags in grocery stores will lead to an in uptake of reusable bags. |
Does a Universal Basic Income influence retail worker wages? | Universal Basic Income retail worker wages. |
Does rainy weather impact the amount of moderate to high intensity exercise people do per week in the city of Vancouver? | Rainy weather the amount of moderate to high intensity exercise people do per week in the city of Vancouver. |
Does introducing fluoride to the water system in the city of Austin impact number of dental visits per capita per year? | Introducing fluoride to the water system in the city of Austin the number of dental visits per capita per year? |
Does giving children chocolate rewards during study time for positive answers impact standardized test scores? | Giving children chocolate rewards during study time for positive answers standardized test scores. |
A non-directional hypothesis does not specify the predicted direction (e.g. positivity or negativity) of the effect of the independent variable on the dependent variable.
These hypotheses predict an effect, but stop short of saying what that effect will be.
A non-directional hypothesis is similar to composite and alternative hypotheses. All three types of hypothesis tend to make predictions without defining a direction. In a composite hypothesis, a specific prediction is not made (although a general direction may be indicated, so the overlap is not complete). For an alternative hypothesis, you often predict that the even will be anything but the null hypothesis, which means it could be more or less than H 0 (or in other words, non-directional).
Let’s turn the above directional hypotheses into non-directional hypotheses.
Question | Non-Directional Hypothesis |
---|---|
Does adding a 10c charge to plastic bags at grocery stores lead to changes in uptake of reusable bags? | Adding a 10c charge to plastic bags in grocery stores will lead to a in uptake of reusable bags. |
Does a Universal Basic Income influence retail worker wages? | Universal Basic Income retail worker wages. |
Does rainy weather impact the amount of moderate to high intensity exercise people do per week in the city of Vancouver? | Rainy weather the amount of moderate to high intensity exercise people do per week in the city of Vancouver. |
Does introducing fluoride to the water system in the city of Austin impact number of dental visits per capita per year? | Introducing fluoride to the water system in the city of Austin the number of dental visits per capita per year? |
Does giving children chocolate rewards during study time for positive answers impact standardized test scores? | Giving children chocolate rewards during study time for positive answers standardized test scores. |
A logical hypothesis is a hypothesis that cannot be tested, but has some logical basis underpinning our assumptions.
These are most commonly used in philosophy because philosophical questions are often untestable and therefore we must rely on our logic to formulate logical theories.
Usually, we would want to turn a logical hypothesis into an empirical one through testing if we got the chance. Unfortunately, we don’t always have this opportunity because the test is too complex, expensive, or simply unrealistic.
Here are some examples:
An empirical hypothesis is the opposite of a logical hypothesis. It is a hypothesis that is currently being tested using scientific analysis. We can also call this a ‘working hypothesis’.
We can to separate research into two types: theoretical and empirical. Theoretical research relies on logic and thought experiments. Empirical research relies on tests that can be verified by observation and measurement.
So, an empirical hypothesis is a hypothesis that can and will be tested.
Each of the above hypotheses can be tested, making them empirical rather than just logical (aka theoretical).
A statistical hypothesis utilizes representative statistical models to draw conclusions about broader populations.
It requires the use of datasets or carefully selected representative samples so that statistical inference can be drawn across a larger dataset.
This type of research is necessary when it is impossible to assess every single possible case. Imagine, for example, if you wanted to determine if men are taller than women. You would be unable to measure the height of every man and woman on the planet. But, by conducting sufficient random samples, you would be able to predict with high probability that the results of your study would remain stable across the whole population.
You would be right in guessing that almost all quantitative research studies conducted in academic settings today involve statistical hypotheses.
An associative hypothesis predicts that two variables are linked but does not explore whether one variable directly impacts upon the other variable.
We commonly refer to this as “ correlation does not mean causation ”. Just because there are a lot of sick people in a hospital, it doesn’t mean that the hospital made the people sick. There is something going on there that’s causing the issue (sick people are flocking to the hospital).
So, in an associative hypothesis, you note correlation between an independent and dependent variable but do not make a prediction about how the two interact. You stop short of saying one thing causes another thing.
A causal hypothesis predicts that two variables are not only associated, but that changes in one variable will cause changes in another.
A causal hypothesis is harder to prove than an associative hypothesis because the cause needs to be definitively proven. This will often require repeating tests in controlled environments with the researchers making manipulations to the independent variable, or the use of control groups and placebo effects .
If we were to take the above example of lice in the hair of sick people, researchers would have to put lice in sick people’s hair and see if it made those people healthier. Researchers would likely observe that the lice would flee the hair, but the sickness would remain, leading to a finding of association but not causation.
Question | Causation Hypothesis | Correlation Hypothesis |
---|---|---|
Does marriage cause baldness among men? | Marriage causes stress which leads to hair loss. | Marriage occurs at an age when men naturally start balding. |
What is the relationship between recreational drugs and psychosis? | Recreational drugs cause psychosis. | People with psychosis take drugs to self-medicate. |
Do ice cream sales lead to increase drownings? | Ice cream sales cause increased drownings. | Ice cream sales peak during summer, when more people are swimming and therefore more drownings are occurring. |
For brevity’s sake, I have paired these two hypotheses into the one point. The reality is that we’ve already seen both of these types of hypotheses at play already.
An exact hypothesis (also known as a point hypothesis) specifies a specific prediction whereas an inexact hypothesis assumes a range of possible values without giving an exact outcome. As Helwig [2] argues:
“An “exact” hypothesis specifies the exact value(s) of the parameter(s) of interest, whereas an “inexact” hypothesis specifies a range of possible values for the parameter(s) of interest.”
Generally, a null hypothesis is an exact hypothesis whereas alternative, composite, directional, and non-directional hypotheses are all inexact.
See Next: 15 Hypothesis Examples
This is introductory information that is basic and indeed quite simplified for absolute beginners. It’s worth doing further independent research to get deeper knowledge of research methods and how to conduct an effective research study. And if you’re in education studies, don’t miss out on my list of the best education studies dissertation ideas .
[1] https://jnnp.bmj.com/content/91/6/571.abstract
[2] http://users.stat.umn.edu/~helwig/notes/SignificanceTesting.pdf
Wow! This introductionary materials are very helpful. I teach the begginers in research for the first time in my career. The given tips and materials are very helpful. Chris, thank you so much! Excellent materials!
You’re more than welcome! If you want a pdf version of this article to provide for your students to use as a weekly reading on in-class discussion prompt for seminars, just drop me an email in the Contact form and I’ll get one sent out to you.
When I’ve taught this seminar, I’ve put my students into groups, cut these definitions into strips, and handed them out to the groups. Then I get them to try to come up with hypotheses that fit into each ‘type’. You can either just rotate hypothesis types so they get a chance at creating a hypothesis of each type, or get them to “teach” their hypothesis type and examples to the class at the end of the seminar.
Cheers, Chris
Your email address will not be published. Required fields are marked *
An official website of the United States government
The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.
The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.
The PMC website is updating on October 15, 2024. Learn More or Try it out now .
Priya ranganathan.
1 Department of Anesthesiology, Critical Care and Pain, Tata Memorial Hospital, Mumbai, Maharashtra, India
2 Department of Surgical Oncology, Tata Memorial Centre, Mumbai, Maharashtra, India
The second article in this series on biostatistics covers the concepts of sample, population, research hypotheses and statistical errors.
Ranganathan P, Pramesh CS. An Introduction to Statistics: Understanding Hypothesis Testing and Statistical Errors. Indian J Crit Care Med 2019;23(Suppl 3):S230–S231.
Two papers quoted in this issue of the Indian Journal of Critical Care Medicine report. The results of studies aim to prove that a new intervention is better than (superior to) an existing treatment. In the ABLE study, the investigators wanted to show that transfusion of fresh red blood cells would be superior to standard-issue red cells in reducing 90-day mortality in ICU patients. 1 The PROPPR study was designed to prove that transfusion of a lower ratio of plasma and platelets to red cells would be superior to a higher ratio in decreasing 24-hour and 30-day mortality in critically ill patients. 2 These studies are known as superiority studies (as opposed to noninferiority or equivalence studies which will be discussed in a subsequent article).
A sample represents a group of participants selected from the entire population. Since studies cannot be carried out on entire populations, researchers choose samples, which are representative of the population. This is similar to walking into a grocery store and examining a few grains of rice or wheat before purchasing an entire bag; we assume that the few grains that we select (the sample) are representative of the entire sack of grains (the population).
The results of the study are then extrapolated to generate inferences about the population. We do this using a process known as hypothesis testing. This means that the results of the study may not always be identical to the results we would expect to find in the population; i.e., there is the possibility that the study results may be erroneous.
A clinical trial begins with an assumption or belief, and then proceeds to either prove or disprove this assumption. In statistical terms, this belief or assumption is known as a hypothesis. Counterintuitively, what the researcher believes in (or is trying to prove) is called the “alternate” hypothesis, and the opposite is called the “null” hypothesis; every study has a null hypothesis and an alternate hypothesis. For superiority studies, the alternate hypothesis states that one treatment (usually the new or experimental treatment) is superior to the other; the null hypothesis states that there is no difference between the treatments (the treatments are equal). For example, in the ABLE study, we start by stating the null hypothesis—there is no difference in mortality between groups receiving fresh RBCs and standard-issue RBCs. We then state the alternate hypothesis—There is a difference between groups receiving fresh RBCs and standard-issue RBCs. It is important to note that we have stated that the groups are different, without specifying which group will be better than the other. This is known as a two-tailed hypothesis and it allows us to test for superiority on either side (using a two-sided test). This is because, when we start a study, we are not 100% certain that the new treatment can only be better than the standard treatment—it could be worse, and if it is so, the study should pick it up as well. One tailed hypothesis and one-sided statistical testing is done for non-inferiority studies, which will be discussed in a subsequent paper in this series.
There are two possibilities to consider when interpreting the results of a superiority study. The first possibility is that there is truly no difference between the treatments but the study finds that they are different. This is called a Type-1 error or false-positive error or alpha error. This means falsely rejecting the null hypothesis.
The second possibility is that there is a difference between the treatments and the study does not pick up this difference. This is called a Type 2 error or false-negative error or beta error. This means falsely accepting the null hypothesis.
The power of the study is the ability to detect a difference between groups and is the converse of the beta error; i.e., power = 1-beta error. Alpha and beta errors are finalized when the protocol is written and form the basis for sample size calculation for the study. In an ideal world, we would not like any error in the results of our study; however, we would need to do the study in the entire population (infinite sample size) to be able to get a 0% alpha and beta error. These two errors enable us to do studies with realistic sample sizes, with the compromise that there is a small possibility that the results may not always reflect the truth. The basis for this will be discussed in a subsequent paper in this series dealing with sample size calculation.
Conventionally, type 1 or alpha error is set at 5%. This means, that at the end of the study, if there is a difference between groups, we want to be 95% certain that this is a true difference and allow only a 5% probability that this difference has occurred by chance (false positive). Type 2 or beta error is usually set between 10% and 20%; therefore, the power of the study is 90% or 80%. This means that if there is a difference between groups, we want to be 80% (or 90%) certain that the study will detect that difference. For example, in the ABLE study, sample size was calculated with a type 1 error of 5% (two-sided) and power of 90% (type 2 error of 10%) (1).
Table 1 gives a summary of the two types of statistical errors with an example
Statistical errors
(a) Types of statistical errors | |||
: Null hypothesis is | |||
True | False | ||
Null hypothesis is actually | True | Correct results! | Falsely rejecting null hypothesis - Type I error |
False | Falsely accepting null hypothesis - Type II error | Correct results! | |
(b) Possible statistical errors in the ABLE trial | |||
There is difference in mortality between groups receiving fresh RBCs and standard-issue RBCs | There difference in mortality between groups receiving fresh RBCs and standard-issue RBCs | ||
Truth | There is difference in mortality between groups receiving fresh RBCs and standard-issue RBCs | Correct results! | Falsely rejecting null hypothesis - Type I error |
There difference in mortality between groups receiving fresh RBCs and standard-issue RBCs | Falsely accepting null hypothesis - Type II error | Correct results! |
In the next article in this series, we will look at the meaning and interpretation of ‘ p ’ value and confidence intervals for hypothesis testing.
Source of support: Nil
Conflict of interest: None
The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.
H 0 , the — null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.
H a —, the alternative hypothesis: a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .
Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.
After you have determined which hypothesis the sample supports, you make a decision. There are two options for a decision. They are reject H 0 if the sample information favors the alternative hypothesis or do not reject H 0 or decline to reject H 0 if the sample information is insufficient to reject the null hypothesis.
Mathematical Symbols Used in H 0 and H a :
equal (=) | not equal (≠) greater than (>) less than (<) |
greater than or equal to (≥) | less than (<) |
less than or equal to (≤) | more than (>) |
H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.
H 0 : No more than 30 percent of the registered voters in Santa Clara County voted in the primary election. p ≤ 30 H a : More than 30 percent of the registered voters in Santa Clara County voted in the primary election. p > 30
A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25 percent. State the null and alternative hypotheses.
We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are the following: H 0 : μ = 2.0 H a : μ ≠ 2.0
We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.
We want to test if college students take fewer than five years to graduate from college, on the average. The null and alternative hypotheses are the following: H 0 : μ ≥ 5 H a : μ < 5
We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.
An article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third of the students pass. The same article stated that 6.6 percent of U.S. students take advanced placement exams and 4.4 percent pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6 percent. State the null and alternative hypotheses. H 0 : p ≤ 0.066 H a : p > 0.066
On a state driver’s test, about 40 percent pass the test on the first try. We want to test if more than 40 percent pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.
Bring to class a newspaper, some news magazines, and some internet articles. In groups, find articles from which your group can write null and alternative hypotheses. Discuss your hypotheses with the rest of the class.
This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.
Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute Texas Education Agency (TEA). The original material is available at: https://www.texasgateway.org/book/tea-statistics . Changes were made to the original material, including updates to art, structure, and other content updates.
Access for free at https://openstax.org/books/statistics/pages/1-introduction
© Apr 16, 2024 Texas Education Agency (TEA). The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.
Hypothesis testing is the act of testing a hypothesis or a supposition in relation to a statistical parameter. Analysts implement hypothesis testing in order to test if a hypothesis is plausible or not.
In data science and statistics , hypothesis testing is an important step as it involves the verification of an assumption that could help develop a statistical parameter. For instance, a researcher establishes a hypothesis assuming that the average of all odd numbers is an even number.
In order to find the plausibility of this hypothesis, the researcher will have to test the hypothesis using hypothesis testing methods. Unlike a hypothesis that is ‘supposed’ to stand true on the basis of little or no evidence, hypothesis testing is required to have plausible evidence in order to establish that a statistical hypothesis is true.
Perhaps this is where statistics play an important role. A number of components are involved in this process. But before understanding the process involved in hypothesis testing in research methodology, we shall first understand the types of hypotheses that are involved in the process. Let us get started!
In data sampling, different types of hypothesis are involved in finding whether the tested samples test positive for a hypothesis or not. In this segment, we shall discover the different types of hypotheses and understand the role they play in hypothesis testing.
Alternative Hypothesis (H1) or the research hypothesis states that there is a relationship between two variables (where one variable affects the other). The alternative hypothesis is the main driving force for hypothesis testing.
It implies that the two variables are related to each other and the relationship that exists between them is not due to chance or coincidence.
When the process of hypothesis testing is carried out, the alternative hypothesis is the main subject of the testing process. The analyst intends to test the alternative hypothesis and verifies its plausibility.
The Null Hypothesis (H0) aims to nullify the alternative hypothesis by implying that there exists no relation between two variables in statistics. It states that the effect of one variable on the other is solely due to chance and no empirical cause lies behind it.
The null hypothesis is established alongside the alternative hypothesis and is recognized as important as the latter. In hypothesis testing, the null hypothesis has a major role to play as it influences the testing against the alternative hypothesis.
(Must read: What is ANOVA test? )
The Non-directional hypothesis states that the relation between two variables has no direction.
Simply put, it asserts that there exists a relation between two variables, but does not recognize the direction of effect, whether variable A affects variable B or vice versa.
The Directional hypothesis, on the other hand, asserts the direction of effect of the relationship that exists between two variables.
Herein, the hypothesis clearly states that variable A affects variable B, or vice versa.
A statistical hypothesis is a hypothesis that can be verified to be plausible on the basis of statistics.
By using data sampling and statistical knowledge, one can determine the plausibility of a statistical hypothesis and find out if it stands true or not.
(Related blog: z-test vs t-test )
Now that we have understood the types of hypotheses and the role they play in hypothesis testing, let us now move on to understand the process in a better manner.
In hypothesis testing, a researcher is first required to establish two hypotheses - alternative hypothesis and null hypothesis in order to begin with the procedure.
To establish these two hypotheses, one is required to study data samples, find a plausible pattern among the samples, and pen down a statistical hypothesis that they wish to test.
A random population of samples can be drawn, to begin with hypothesis testing. Among the two hypotheses, alternative and null, only one can be verified to be true. Perhaps the presence of both hypotheses is required to make the process successful.
At the end of the hypothesis testing procedure, either of the hypotheses will be rejected and the other one will be supported. Even though one of the two hypotheses turns out to be true, no hypothesis can ever be verified 100%.
(Read also: Types of data sampling techniques )
Therefore, a hypothesis can only be supported based on the statistical samples and verified data. Here is a step-by-step guide for hypothesis testing.
First things first, one is required to establish two hypotheses - alternative and null, that will set the foundation for hypothesis testing.
These hypotheses initiate the testing process that involves the researcher working on data samples in order to either support the alternative hypothesis or the null hypothesis.
Once the hypotheses have been formulated, it is now time to generate a testing plan. A testing plan or an analysis plan involves the accumulation of data samples, determining which statistic is to be considered and laying out the sample size.
All these factors are very important while one is working on hypothesis testing.
As soon as a testing plan is ready, it is time to move on to the analysis part. Analysis of data samples involves configuring statistical values of samples, drawing them together, and deriving a pattern out of these samples.
While analyzing the data samples, a researcher needs to determine a set of things -
Significance Level - The level of significance in hypothesis testing indicates if a statistical result could have significance if the null hypothesis stands to be true.
Testing Method - The testing method involves a type of sampling-distribution and a test statistic that leads to hypothesis testing. There are a number of testing methods that can assist in the analysis of data samples.
Test statistic - Test statistic is a numerical summary of a data set that can be used to perform hypothesis testing.
P-value - The P-value interpretation is the probability of finding a sample statistic to be as extreme as the test statistic, indicating the plausibility of the null hypothesis.
The analysis of data samples leads to the inference of results that establishes whether the alternative hypothesis stands true or not. When the P-value is less than the significance level, the null hypothesis is rejected and the alternative hypothesis turns out to be plausible.
As we have already looked into different aspects of hypothesis testing, we shall now look into the different methods of hypothesis testing. All in all, there are 2 most common types of hypothesis testing methods. They are as follows -
The frequentist hypothesis or the traditional approach to hypothesis testing is a hypothesis testing method that aims on making assumptions by considering current data.
The supposed truths and assumptions are based on the current data and a set of 2 hypotheses are formulated. A very popular subtype of the frequentist approach is the Null Hypothesis Significance Testing (NHST).
The NHST approach (involving the null and alternative hypothesis) has been one of the most sought-after methods of hypothesis testing in the field of statistics ever since its inception in the mid-1950s.
A much unconventional and modern method of hypothesis testing, the Bayesian Hypothesis Testing claims to test a particular hypothesis in accordance with the past data samples, known as prior probability, and current data that lead to the plausibility of a hypothesis.
The result obtained indicates the posterior probability of the hypothesis. In this method, the researcher relies on ‘prior probability and posterior probability’ to conduct hypothesis testing on hand.
On the basis of this prior probability, the Bayesian approach tests a hypothesis to be true or false. The Bayes factor, a major component of this method, indicates the likelihood ratio among the null hypothesis and the alternative hypothesis.
The Bayes factor is the indicator of the plausibility of either of the two hypotheses that are established for hypothesis testing.
(Also read - Introduction to Bayesian Statistics )
To conclude, hypothesis testing, a way to verify the plausibility of a supposed assumption can be done through different methods - the Bayesian approach or the Frequentist approach.
Although the Bayesian approach relies on the prior probability of data samples, the frequentist approach assumes without a probability. A number of elements involved in hypothesis testing are - significance level, p-level, test statistic, and method of hypothesis testing.
(Also read: Introduction to probability distributions )
A significant way to determine whether a hypothesis stands true or not is to verify the data samples and identify the plausible hypothesis among the null hypothesis and alternative hypothesis.
Be a part of our Instagram community
5 Factors Influencing Consumer Behavior
Elasticity of Demand and its Types
An Overview of Descriptive Analysis
What is PESTLE Analysis? Everything you need to know about it
What is Managerial Economics? Definition, Types, Nature, Principles, and Scope
5 Factors Affecting the Price Elasticity of Demand (PED)
6 Major Branches of Artificial Intelligence (AI)
Scope of Managerial Economics
Dijkstra’s Algorithm: The Shortest Path Algorithm
Different Types of Research Methods
Home » What is a Hypothesis – Types, Examples and Writing Guide
Table of Contents
Definition:
Hypothesis is an educated guess or proposed explanation for a phenomenon, based on some initial observations or data. It is a tentative statement that can be tested and potentially proven or disproven through further investigation and experimentation.
Hypothesis is often used in scientific research to guide the design of experiments and the collection and analysis of data. It is an essential element of the scientific method, as it allows researchers to make predictions about the outcome of their experiments and to test those predictions to determine their accuracy.
Types of Hypothesis are as follows:
A research hypothesis is a statement that predicts a relationship between variables. It is usually formulated as a specific statement that can be tested through research, and it is often used in scientific research to guide the design of experiments.
The null hypothesis is a statement that assumes there is no significant difference or relationship between variables. It is often used as a starting point for testing the research hypothesis, and if the results of the study reject the null hypothesis, it suggests that there is a significant difference or relationship between variables.
An alternative hypothesis is a statement that assumes there is a significant difference or relationship between variables. It is often used as an alternative to the null hypothesis and is tested against the null hypothesis to determine which statement is more accurate.
A directional hypothesis is a statement that predicts the direction of the relationship between variables. For example, a researcher might predict that increasing the amount of exercise will result in a decrease in body weight.
A non-directional hypothesis is a statement that predicts the relationship between variables but does not specify the direction. For example, a researcher might predict that there is a relationship between the amount of exercise and body weight, but they do not specify whether increasing or decreasing exercise will affect body weight.
A statistical hypothesis is a statement that assumes a particular statistical model or distribution for the data. It is often used in statistical analysis to test the significance of a particular result.
A composite hypothesis is a statement that assumes more than one condition or outcome. It can be divided into several sub-hypotheses, each of which represents a different possible outcome.
An empirical hypothesis is a statement that is based on observed phenomena or data. It is often used in scientific research to develop theories or models that explain the observed phenomena.
A simple hypothesis is a statement that assumes only one outcome or condition. It is often used in scientific research to test a single variable or factor.
A complex hypothesis is a statement that assumes multiple outcomes or conditions. It is often used in scientific research to test the effects of multiple variables or factors on a particular outcome.
Hypotheses are used in various fields to guide research and make predictions about the outcomes of experiments or observations. Here are some examples of how hypotheses are applied in different fields:
Here are the steps to follow when writing a hypothesis:
The first step is to identify the research question that you want to answer through your study. This question should be clear, specific, and focused. It should be something that can be investigated empirically and that has some relevance or significance in the field.
Before writing your hypothesis, it’s essential to conduct a thorough literature review to understand what is already known about the topic. This will help you to identify the research gap and formulate a hypothesis that builds on existing knowledge.
The next step is to identify the variables involved in the research question. A variable is any characteristic or factor that can vary or change. There are two types of variables: independent and dependent. The independent variable is the one that is manipulated or changed by the researcher, while the dependent variable is the one that is measured or observed as a result of the independent variable.
Based on the research question and the variables involved, you can now formulate your hypothesis. A hypothesis should be a clear and concise statement that predicts the relationship between the variables. It should be testable through empirical research and based on existing theory or evidence.
The null hypothesis is the opposite of the alternative hypothesis, which is the hypothesis that you are testing. The null hypothesis states that there is no significant difference or relationship between the variables. It is important to write the null hypothesis because it allows you to compare your results with what would be expected by chance.
After formulating the hypothesis, it’s important to refine it and make it more precise. This may involve clarifying the variables, specifying the direction of the relationship, or making the hypothesis more testable.
Here are a few examples of hypotheses in different fields:
The purpose of a hypothesis is to provide a testable explanation for an observed phenomenon or a prediction of a future outcome based on existing knowledge or theories. A hypothesis is an essential part of the scientific method and helps to guide the research process by providing a clear focus for investigation. It enables scientists to design experiments or studies to gather evidence and data that can support or refute the proposed explanation or prediction.
The formulation of a hypothesis is based on existing knowledge, observations, and theories, and it should be specific, testable, and falsifiable. A specific hypothesis helps to define the research question, which is important in the research process as it guides the selection of an appropriate research design and methodology. Testability of the hypothesis means that it can be proven or disproven through empirical data collection and analysis. Falsifiability means that the hypothesis should be formulated in such a way that it can be proven wrong if it is incorrect.
In addition to guiding the research process, the testing of hypotheses can lead to new discoveries and advancements in scientific knowledge. When a hypothesis is supported by the data, it can be used to develop new theories or models to explain the observed phenomenon. When a hypothesis is not supported by the data, it can help to refine existing theories or prompt the development of new hypotheses to explain the phenomenon.
Here are some common situations in which hypotheses are used:
Here are some common characteristics of a hypothesis:
Hypotheses have several advantages in scientific research and experimentation:
Some Limitations of the Hypothesis are as follows:
Researcher, Academic Writer, Web developer
Formal hypothesis testing is perhaps the most prominent and widely-employed form of statistical analysis. It is sometimes seen as the most rigorous and definitive part of a statistical analysis, but it is also the source of many statistical controversies. The currently-prevalent approach to hypothesis testing dates to developments that took place between 1925 and 1940, especially the work of Ronald Fisher , Jerzy Neyman , and Egon Pearson .
In recent years, many prominent statisticians have argued that less emphasis should be placed on the formal hypothesis testing approaches developed in the early twentieth century, with a correspondingly greater emphasis on other forms of uncertainty analysis. Our goal here is to give an overview of some of the well-established and widely-used approaches for hypothesis testing. We will also provide some perspectives on how these tools can be effectively used, and discuss their limitations. We will also discuss some new approaches to hypothesis testing that may eventually come to be as prominent as these classical approaches.
A falsifiable hypothesis is a statement, or hypothesis, that can be contradicted with evidence. In empirical (data-driven) research, this evidence will always be obtained through the data. In statistical hypothesis testing, the hypothesis that we formally test is called the null hypothesis . The alternative hypothesis is a second hypothesis that is our proposed explanation for what happens if the null hypothesis is wrong.
The key element of a statistical hypothesis test is the test statistic , which (like any statistic) is a function of the data. A test statistic takes our entire dataset, and reduces it to one number. This one number ideally should contain all the information in the data that is relevant for assessing the two hypotheses of interest, and exclude any aspects of the data that are irrelevant for assessing the two hypotheses. The test statistic measures evidence against the null hypothesis. Most test statistics are constructed so that a value of zero represents the lowest possible level of evidence against the null hypothesis. Test statistic values that deviate from zero represent greater levels of evidence against the null hypothesis. The larger the magnitude of the test statistic, the stronger the evidence against the null hypothesis.
A major theme of statistical research is to devise effective ways to construct test statistics. Many useful ways to do this have been devised, and there is no single approach that is always the best. In this introductory course, we will focus on tests that starting with an estimate of a quantity that is relevant for assessing the hypotheses, then proceed by standardizing this estimate by dividing it by its standard error. This approach is sometimes referred to as “Wald testing”, after Abraham Wald .
As a basic example, let’s consider risk perception related to COVID-19. As you will see below, hypothesis testing can appear at first to be a fairly elaborate exercise. Using this example, we describe each aspect of this exercise in detail below.
The data shown below are simulated but are designed to reflect actual surveys conducted in the United States in March of 2020. Partipants were asked whether they perceive that they have a substantial risk of dying if they are infected with the novel coronavirus. The number of people stating each response, stratified on age, are shown below (only two age groups are shown):
High risk | Not high risk | |
---|---|---|
Age < 30 | 25 | 202 |
Age 60-69 | 30 | 124 |
Each subject’s response is binary – they either perceive themselves to be high risk, or not to be at high risk. When working with this type of data, we are usually interested in the proportion of people who provide each response within each stratum (age group). These are conditional proportions, conditioning on the age group. The numerical values of the conditional proportions are given below:
High risk | Not high risk | |
---|---|---|
Age < 30 | 0.110 | 0.890 |
Age 60-69 | 0.195 | 0.805 |
There are four conditional proportions in the table above – the proportion of younger people who perceive themselves to be at higher risk, 0.110=25/(25+202); the proportion of younger people who do not perceive themselves to be at high risk, 0.890=202/(25+202); the proportion of older people who perceive themselves to be at high risk 0.195=30/(30+124); and the proportion of older people who do not perceive themselves to be at high risk, 0.805=124/(30+124).
The trend in the data is that younger people perceive themselves to be at lower risk of dying than older people, by a difference of 0.195-0.110=0.085 (in terms of proportions). But is this trend only present in this sample, or is it generalizable to a broader population (say the entire US population)? That is the goal of conducting a statistical hypothesis test in this setting.
Corresponding to our data above is the unobserved population structure, which we can denote as follows
High risk | Not high risk | |
---|---|---|
Age < 30 | \(p\) | \(1-p\) |
Age 60-69 | \(q\) | \(1-q\) |
The symbols \(p\) and \(q\) in the table above are population parameters . These are quantitites that we do not know, and wish to assess using the data. In this case, our null hypothesis can be expressed as the statement \(p = q\) . We can estimate \(p\) using the sample proportion \(\hat{p} = 0.110\) , and similarly estimate \(q\) using \(\hat{q} = 0.195\) . However these estimates do not immediately provide us with a way of expressing the evidence relating to the hypothesis that \(p=q\) . This is provided by the test statistic.
As noted above, a test statistic is a reduction of the data to one number that captures all of the relevant information for assessing the hypotheses. A natural first choice for a test statistic here would be the difference in sample proportions between the two age groups, which is 0.195 - 0.110 = 0.085. There is a difference of 0.085 between the perceived risks of death in the younger and older age groups.
The difference in rates (0.085) does not on its own make a good test statistic, although it is a good start toward obtaining one. The reason for this is that the evidence underlying this difference in rates depends also on the absolute rates (0.110 and 0.195), and on the sample sizes (227 and 154). If we only know that the difference in rates is 0.085, this is not sufficient to evaluate the hypothesis in a statistical manner. A given difference in rates is much stronger evidence if it is obtained from a larger sample. If we have a difference of 0.085 with a very large sample, say one million people, then we should be almost certain that the true rates differ (i.e. the data are highly incompatiable with the hypothesis that \(p=q\) ). If we have the same difference in rates of 0.085, but with a small sample, say 50 people per age group, then there would be almost no evidence for a true difference in the rates (i.e. the data are compatiable with the hypothesis \(p=q\) ).
To address this issue, we need to consider the uncertainty in the estimated rate difference, which is 0.085. Recall that the estimated rate difference is obtained from the sample and therefore is almost certain to deviate somewhat from the true rate difference in the population (which is unknown). Recall from our study of standard errors that the standard error for an estimated proportion is \(\sqrt{p(1-p)/n}\) , where \(p\) is the outcome probability (here the outcome is that a person perceives a high risk of dying), and \(n\) is the sample size.
In the present analysis, we are comparing two proportions, so we have two standard errors. The estimated standard error for the younger people is \(\sqrt{0.11\cdot 0.89/227} \approx 0.021\) . The estimated standard error for the older people is \(\sqrt{0.195\cdot 0.805/154} \approx 0.032\) . Note that both standard errors are estimated, rather than exact, because we are plugging in estimates of the rates (0.11 and 0.195). Also note that the standard error for the rate among older people is greater than that for younger people. This is because the sample size for older people is smaller, and also because the estimated rate for older people is closer to 1/2.
In our previous discussion of standard errors, we saw how standard errors for independent quantities \(A\) and \(B\) can be used to obtain the standard error for the difference \(A-B\) . Applying that result here, we see that the standard error for the estimated difference in rates 0.195-0.11=0.085 is \(\sqrt{0.021^2 + 0.032^2} \approx 0.038\) .
The final step in constructing our test statistic is to construct a Z-score from the estimated difference in rates. As with all Z-scores, we proceed by taking the estimated difference in rates, and then divide it by its standard error. Thus, we get a test statistic value of \(0.085 / 0.038 \approx 2.24\) .
A test statistic value of 2.24 is not very close to zero, so there is some evidence against the null hypothesis. But the strength of this evidence remains unclear. Thus, we must consider how to calibrate this evidence in a way that makes it more interpretable.
By the central limit theorem (CLT), a Z-score approximately follows a normal distribution. When the null hypothesis holds, the Z-score approximately follows the standard normal distribution (recall that a standard normal distribution is a normal distribution with expected value equal to 0 and variance equal to 1). If the null hypothesis does not hold, then the test statistic continues to approximately follow a normal distribution, but it is not the standard normal distribution.
A test statistic of zero represents the least possible evidence against the null hypothesis. Here, we will obtain a test statistic of zero when the two proportions being compared are identical, i.e. exactly the same proportions of younger and older people perceive a substantial risk of dying from a disease. Even if the test statistic is exactly zero, this does not guarantee that the null hypothesis is true. However it is the least amount of evidence that the data can present against the null hypothesis.
In a hypothesis testing setting using normally-distrbuted Z-scores, as is the case here (due to the CLT), the standard normal distribution is the reference distribution for our test statistic. If the Z-score falls in the center of the reference distribution, there is no evidence against the null hypothesis. If the Z-score falls into either tail of the reference distribution, then there is evidence against the null distribution, and the further into the tails of the reference distribution the Z-score falls, the greater the evidence.
The most conventional way to quantify the evidence in our test statistic is through a probability called the p-value . The p-value has a somewhat complex definition that many people find difficult to grasp. It is the probability of observing as much or more evidence against the null hypothesis as we actually observe, calculated when the null hypothesis is assumed to be true. We will discuss some ways to think about this more intuitively below.
For our purposes, “evidence against the null hypothesis” is reflected in how far into the tails of the reference distribution the Z-score (test statistic) falls. We observed a test statistic of 2.24 in our COVID risk perception analysis. Recall that due to the “empirical rule”, 95% of the time, a draw from a standard normal distribution falls between -2 and 2. Thus, the p-value must be less than 0.05, since 2.24 falls outside this interval. The p-value can be calculated using a computer, in this case it happens to be approximately 0.025.
As stated above, the p-value tells us how likely it would be for us to obtain as much evidence against the the null hypothesis as we observed in our actual data analysis, if we were certain that the null hypothesis were true. When the null hypothesis holds, any evidence against the null hypothesis is spurious. Thus, we will want to see stronger evidence against the null from our actual analysis than we would see if we know that the null hypothesis were true. A smaller p-value therefore reflects more evidence against the null hypothesis than a larger p-value.
By convention, p-values of 0.05 or smaller are considered to represent sufficiently strong evidence against the null hypothesis to make a finding “statistically significant”. This threshold of 0.05 was chosen arbitrarily 100 years ago, and there is no objective reason for it. In recent years, people have argued that either a lesser or a greater p-value threshold should be used. But largely due to convention, the practice of deeming p-values smaller than 0.05 to be statistically significant continues.
Here is a restatement of the above discussion, using slightly different language. In our analysis of COVID risk perceptions, we found a difference in proportions of 0.085 between younger and older subjects, with younger people perceiving a lower risk of dying. This is a difference based on the sample of data that we observed, but what we really want to know is whether there is a difference in COVID risk perception in the population (say, all US adults).
Suppose that in fact there is no difference in risk perception between younger and older people. For instance, suppose that in the population, 15% of people believe that they have a substantial risk of dying should they become infected with the novel coronavirus, regardless of their age. Even though the rates are equal in this imaginary population (both being 15%), the rates in our sample would typically not be equal. Around 3% of the time (0.024=2.4% to be exact), if the rates are actually equal in the population, we would see a test statistic that is 2.4 or larger. Since 3% represents a fairly rare event, we can conclude that our observed data are not compatible with the null hypothesis. We can also say that there is statistically significant evidence against the null hypothesis, and that we have “rejected” the null hypothesis at the 3% level.
In this data analysis, as in any data analysis, we cannot confirm definitively that the alternative hypothesis is true. But based on our data and the analysis performed above, we can claim that there is substantial evidence against the null hypothesis, using standard criteria for what is considered to be “substantial evidence”.
A very common setting where hypothesis testing is used arises when we wish to compare the means of a quantitative measurement obtained for two populations. Imagine, for example, that we have two ways of manufacturing a battery, and we wish to assess which approach yields batteries that are longer-lasting in actual use. To do this, suppose we obtain data that tells us the number of charge cycles that were completed in 200 batteries of type A, and in 300 batteries of type B. For the test developed below to be meaningful, the data must be independent and identically distributed samples.
The raw data for this study consists of 500 numbers, but it turns out that the most relevant information from the data is contained in the sample means and sample standard deviations computed within each battery type. Note that this is a huge reduction in complexity, since we started with 500 measurements and are able to summarize this down to just four numbers.
Suppose the summary statistics are as follows, where \(\bar{x}\) , \(\hat{\sigma}_x\) , and \(n\) denote the sample mean, sample standard deviation, and sample size, respectively.
Type | \(\bar{x}\) | \(\hat{\sigma}_x\) | \(n\) |
---|---|---|---|
420 | 70 | 200 | |
403 | 90 | 300 |
The simplest measure comparing the two manufacturing approaches is the difference 420 - 403 = 17. That is, batteries of type A tend to have 17 more charge cycles compared to batteries of type B. This difference is present in our sample, but is it also true that the entire population of type A batteries has more charge cycles than the entire population of type B batteries? That is the goal of conducting a hypothesis test.
The next step in the present analysis is to divide the mean difference, which is 17, by its standard error. As we have seen, the standard error of the mean, or SEM, is \(\sigma/n\) , where \(\sigma\) is the standard deviation and \(n\) is the sample size. Since \(\sigma\) is almost never known, we plug in its estimate \(\hat{\sigma}\) . For the type A batteries, the estimated SEM is thus \(70/\sqrt{200} \approx 4.95\) , and for the type B batteries the estimated SEM is \(90/\sqrt{300} \approx 5.2\) .
Since we are comparing two estimated means that are obtained from independent samples, we can pool the standard deviations to obtain an overall standard deviation of \(\sqrt{4.95^2 + 5.2^2} \approx 7.18\) . We can now obtain our test statistic \(17/7.18 \approx 2.37\) .
The test statistic can be calibrated against a standard normal reference distribution. The probability of observing a standard normal value that is greater in magnitude than 2.37 is 0.018 (this can be obtained from a computer). This is the p-value, and since it is smaller than the conventional threshold of 0.05, we can claim that there is a statistically significant difference between the average number of charge cycles for the two types of batteries, with the A batteries having more charge cycles on average.
The analysis illustrated here is called a two independent samples Z-test , or just a two sample Z-test . It may be the most commonly employed of all statistical tests. It is also common to see the very similar two sample t-test , which is different only in that it uses the Student t distribution rather than the normal (Gaussian) distribution to calculate the p-values. In fact, there are quite a few minor variations on this testing framework, including “one sided” and “two sided” tests, and tests based on different ways of pooling the variance. Due to the CLT, if the sample size is modestly large (which is the case here), the results of all of these tests will be almost identical. For simplicity, we only cover the Z-test in this course.
The tests for comparing proportions and means presented above are quite similar in many ways. To provide one more example of a hypothesis test that is somewhat different, we consider a test for a correlation coefficient.
Recall that the sample correlation coefficient \(\hat{r}\) is used to assess the relationship, or association, between two quantities X and Y that are measured on the same units. For example, we may ask whether two biomarkers, serum creatinine and D-dimer, are correlated with each other. These biomarkers are both commonly used in medical settings and are obtained using blood tests. D-dimer is used to assess whether a person has blood clots, and serum creatinine is used to measure kidney performance.
Suppose we are interested in whether there is a correlation in the population between D-dimer and serum creatinine. The population correlation coefficient between these two quantitites can be denoted \(r\) . Our null hypothesis is \(r=0\) . Suppose that we observe a sample correlation coefficient of \(\hat{r}=0.15\) , using an independent and identically distributed sample of pairs \((x, y)\) , where \(x\) is a D-dimer measurement and \(y\) is a serum creatinine measurement. Are these data consistent with the null hypothesis?
As above, we proceed by constructing a test statistic by taking the estimated statistic and dividing it by its standard error. The approximate standard error for \(\hat{r}\) is \(1/\sqrt{n}\) , where \(n\) is the sample size. The test statistic is therefore \(\sqrt{n}\cdot \hat{r} \approx 1.48\) .
We now calibrate this test statistic by comparing it to a standard normal reference distribution. Recall from the empirical rule that 5% of the time, a standard normal value falls outside the interval (-2, 2). Therefore, if the test statistic is smaller than 2 in magnitude, as is the case here, its p-value is greater than 0.05. Thus, in this case we know that the p-value will exceed 0.05 without calculating it, and therefore there is no basis for claiming that D-dimer and serum creatinine levels are correlated in this population.
A p-value is the most common way of calibrating evidence. Smaller p-values indicate stronger evidence against a null hypothesis. By convention, if the p-value is smaller than some threshold, usually 0.05, we reject the null hypothesis and declare a finding to be “statistically significant”. How can we understand more deeply what this means? One major concern should be obtaining a small p-value when the null hypothesis is true. If the null hypothesis is true, then it is incorrect to reject it. If we reject the null hypothesis, we are making a false claim. This can never be prevented with complete certainty, but we would like to have a very clear understanding of how likely it is to reject the null hypothesis when the null hypothesis is in fact true.
P-values have a special property that when the null distribution is true, the probability of observing a p-value smaller than 0.05 is 0.05 (5%). In fact, the probability of observing a p-value smaller than \(t\) is equal to \(t\) , for any threshold \(t\) . For example, the probability of observing a p-value smaller than 0.1, when the null hypothesis is true, is 10%.
This fact gives a more concrete understanding of how strong the evidence is for a particular p-value. If we always reject the null hypothesis when the p-value is 0.1 or smaller, then over the long run we will reject the null hypothesis 10% of the time when the null hypothesis is true. If we always reject the null hypothesis when the p-value is 0.05 or smaller, then over the long run we will reject the null hypothesis 5% of the time when the null hypothesis is true.
The approach to hypothesis testing discussed above largely follows the framework developed by RA Fisher around 1925. Note that although we mentioned the alternative hypothesis above, we never actually used it. A more elaborate approach to hypothesis testing was developed somewhat later by Egon Pearson and Jerzy Neyman. The “Neyman-Pearson” approach to hypothesis testing is even more formal than Fisher’s approach, and is most suited to highly planned research efforts in which the study is carefully designed, then executed. While ideally all research projects should be carried out this way, in reality we often conduct research using data that are already available, rather than using data that are specifically collected to address the research question.
Neyman-Pearson hypothesis testing involves specifying an alternative hypothesis that we anticipate encountering. Usually this alternative hypothesis represents a realistic guess about what we might find once the data are collected. In each of the three examples above, imagine that the data are not yet collected, and we are asked to specify an alternative hypothesis. We may arrive at the following:
In comparing risk perceptions for COVID, we may anticipate that older people will perceive a 30% risk of dying, and younger people will anticipate a 5% risk of dying.
In comparing the number of charge cycles for two types of batteries, we may anticipate that batter type A will have on average 500 charge cycles, and battery type B will have on average 400 charge cycles.
In assessing the correlation between D-dimer and serum creatinine levels, we may anticipate a correlation of 0.3.
Note that none of the numbers stated here are data-driven – they are specified before any data are collected, so they do not match the results from the data, which were collected only later. These alternative hypotheses are all essentially speculations, based perhaps on related data or theoretical considerations.
There are several benefits of specifying an explicit alternative hypothesis, as done here, even though it is not strictly necessary and can be avoided entirely by adopting Fisher’s approach to hypothesis testing. One benefit of specifying an alternative hypothesis is that we can use it to assess the power of our planned study, which can in turn inform the design of the study, in particular the sample size. The power is the probability of rejecting the null hypothesis when the alternative hypothesis is true. That is, it is the probability of discovering something real. The power should be contrasted with the level of a hypothesis test, which is the probability of rejecting the null hypothesis when the null hypothesis is true. That is, the level is the probability of “discovering” something that is not real.
To calculate the power, recall that for many of the test statistics that we are considering here, the test statistic has the form \(\hat{\theta}/{\rm SE}(\hat{\theta})\) , where \(\hat{\theta}\) is an estimate. For example, \(\hat{\theta}\) ) may be the correlation coefficient between D-dimer and serum creatinine levels. As stated above, the power is the probability of rejecting the null hypothesis when the alternative hypothesis is true. Suppose we decide to reject the null hypothesis when the test statistic is greater than 2, which is approximately equivalent to rejecting the null hypothesis when the p-value is less than 0.05. The following calculation tells us how to obtain the power in this setting:
Under the alternative hypothesis, \(\sqrt{n}(\hat{r} - r)\) approximately follows a standard normal distribution. Therefore, if \(r\) and \(n\) are given, we can easily use the computer to obtain the probability of observing a value greater than \(2 - \sqrt{n}r\) . This gives us the power of the test. For example, if we anticipate \(r=0.3\) and plan to collect data for \(n=100\) observations, the power is 0.84. This is generally considered to be good power – if the true value of \(r\) is in fact 0.3, we would reject the null hypothesis 84% of the time.
A study usually has poor power because it has too small of a sample size. Poorly powered studies can be very misleading, but since large sample sizes are expensive to collect, a lot of research is conducted using sample sizes that yield moderate or even low power. If a study has low power, it is unlikely to reject the null hypothesis even when the alternative hypothesis is true, but it remains possible to reject the null hypothesis when the null hypothesis is true (usually this probability is 5%). Therefore the most likely outcome of a poorly powered study may be an incorrectly rejected null hypothesis.
Hypothesis testing is a tool for making statistical inferences about the population data. It is an analysis tool that tests assumptions and determines how likely something is within a given standard of accuracy. Hypothesis testing provides a way to verify whether the results of an experiment are valid.
A null hypothesis and an alternative hypothesis are set up before performing the hypothesis testing. This helps to arrive at a conclusion regarding the sample obtained from the population. In this article, we will learn more about hypothesis testing, its types, steps to perform the testing, and associated examples.
1. | |
2. | |
3. | |
4. | |
5. | |
6. | |
7. | |
8. |
Hypothesis testing uses sample data from the population to draw useful conclusions regarding the population probability distribution . It tests an assumption made about the data using different types of hypothesis testing methodologies. The hypothesis testing results in either rejecting or not rejecting the null hypothesis.
Hypothesis testing can be defined as a statistical tool that is used to identify if the results of an experiment are meaningful or not. It involves setting up a null hypothesis and an alternative hypothesis. These two hypotheses will always be mutually exclusive. This means that if the null hypothesis is true then the alternative hypothesis is false and vice versa. An example of hypothesis testing is setting up a test to check if a new medicine works on a disease in a more efficient manner.
The null hypothesis is a concise mathematical statement that is used to indicate that there is no difference between two possibilities. In other words, there is no difference between certain characteristics of data. This hypothesis assumes that the outcomes of an experiment are based on chance alone. It is denoted as \(H_{0}\). Hypothesis testing is used to conclude if the null hypothesis can be rejected or not. Suppose an experiment is conducted to check if girls are shorter than boys at the age of 5. The null hypothesis will say that they are the same height.
The alternative hypothesis is an alternative to the null hypothesis. It is used to show that the observations of an experiment are due to some real effect. It indicates that there is a statistical significance between two possible outcomes and can be denoted as \(H_{1}\) or \(H_{a}\). For the above-mentioned example, the alternative hypothesis would be that girls are shorter than boys at the age of 5.
In hypothesis testing, the p value is used to indicate whether the results obtained after conducting a test are statistically significant or not. It also indicates the probability of making an error in rejecting or not rejecting the null hypothesis.This value is always a number between 0 and 1. The p value is compared to an alpha level, \(\alpha\) or significance level. The alpha level can be defined as the acceptable risk of incorrectly rejecting the null hypothesis. The alpha level is usually chosen between 1% to 5%.
All sets of values that lead to rejecting the null hypothesis lie in the critical region. Furthermore, the value that separates the critical region from the non-critical region is known as the critical value.
Depending upon the type of data available and the size, different types of hypothesis testing are used to determine whether the null hypothesis can be rejected or not. The hypothesis testing formula for some important test statistics are given below:
We will learn more about these test statistics in the upcoming section.
Selecting the correct test for performing hypothesis testing can be confusing. These tests are used to determine a test statistic on the basis of which the null hypothesis can either be rejected or not rejected. Some of the important tests used for hypothesis testing are given below.
A z test is a way of hypothesis testing that is used for a large sample size (n ≥ 30). It is used to determine whether there is a difference between the population mean and the sample mean when the population standard deviation is known. It can also be used to compare the mean of two samples. It is used to compute the z test statistic. The formulas are given as follows:
The t test is another method of hypothesis testing that is used for a small sample size (n < 30). It is also used to compare the sample mean and population mean. However, the population standard deviation is not known. Instead, the sample standard deviation is known. The mean of two samples can also be compared using the t test.
The Chi square test is a hypothesis testing method that is used to check whether the variables in a population are independent or not. It is used when the test statistic is chi-squared distributed.
One tailed hypothesis testing is done when the rejection region is only in one direction. It can also be known as directional hypothesis testing because the effects can be tested in one direction only. This type of testing is further classified into the right tailed test and left tailed test.
Right Tailed Hypothesis Testing
The right tail test is also known as the upper tail test. This test is used to check whether the population parameter is greater than some value. The null and alternative hypotheses for this test are given as follows:
\(H_{0}\): The population parameter is ≤ some value
\(H_{1}\): The population parameter is > some value.
If the test statistic has a greater value than the critical value then the null hypothesis is rejected
Left Tailed Hypothesis Testing
The left tail test is also known as the lower tail test. It is used to check whether the population parameter is less than some value. The hypotheses for this hypothesis testing can be written as follows:
\(H_{0}\): The population parameter is ≥ some value
\(H_{1}\): The population parameter is < some value.
The null hypothesis is rejected if the test statistic has a value lesser than the critical value.
In this hypothesis testing method, the critical region lies on both sides of the sampling distribution. It is also known as a non - directional hypothesis testing method. The two-tailed test is used when it needs to be determined if the population parameter is assumed to be different than some value. The hypotheses can be set up as follows:
\(H_{0}\): the population parameter = some value
\(H_{1}\): the population parameter ≠ some value
The null hypothesis is rejected if the test statistic has a value that is not equal to the critical value.
Hypothesis testing can be easily performed in five simple steps. The most important step is to correctly set up the hypotheses and identify the right method for hypothesis testing. The basic steps to perform hypothesis testing are as follows:
The best way to solve a problem on hypothesis testing is by applying the 5 steps mentioned in the previous section. Suppose a researcher claims that the mean average weight of men is greater than 100kgs with a standard deviation of 15kgs. 30 men are chosen with an average weight of 112.5 Kgs. Using hypothesis testing, check if there is enough evidence to support the researcher's claim. The confidence interval is given as 95%.
Step 1: This is an example of a right-tailed test. Set up the null hypothesis as \(H_{0}\): \(\mu\) = 100.
Step 2: The alternative hypothesis is given by \(H_{1}\): \(\mu\) > 100.
Step 3: As this is a one-tailed test, \(\alpha\) = 100% - 95% = 5%. This can be used to determine the critical value.
1 - \(\alpha\) = 1 - 0.05 = 0.95
0.95 gives the required area under the curve. Now using a normal distribution table, the area 0.95 is at z = 1.645. A similar process can be followed for a t-test. The only additional requirement is to calculate the degrees of freedom given by n - 1.
Step 4: Calculate the z test statistic. This is because the sample size is 30. Furthermore, the sample and population means are known along with the standard deviation.
z = \(\frac{\overline{x}-\mu}{\frac{\sigma}{\sqrt{n}}}\).
\(\mu\) = 100, \(\overline{x}\) = 112.5, n = 30, \(\sigma\) = 15
z = \(\frac{112.5-100}{\frac{15}{\sqrt{30}}}\) = 4.56
Step 5: Conclusion. As 4.56 > 1.645 thus, the null hypothesis can be rejected.
Confidence intervals form an important part of hypothesis testing. This is because the alpha level can be determined from a given confidence interval. Suppose a confidence interval is given as 95%. Subtract the confidence interval from 100%. This gives 100 - 95 = 5% or 0.05. This is the alpha value of a one-tailed hypothesis testing. To obtain the alpha value for a two-tailed hypothesis testing, divide this value by 2. This gives 0.05 / 2 = 0.025.
Related Articles:
Important Notes on Hypothesis Testing
go to slide go to slide go to slide
Book a Free Trial Class
What is hypothesis testing.
Hypothesis testing in statistics is a tool that is used to make inferences about the population data. It is also used to check if the results of an experiment are valid.
The z test in hypothesis testing is used to find the z test statistic for normally distributed data . The z test is used when the standard deviation of the population is known and the sample size is greater than or equal to 30.
The t test in hypothesis testing is used when the data follows a student t distribution . It is used when the sample size is less than 30 and standard deviation of the population is not known.
The formula for a one sample z test in hypothesis testing is z = \(\frac{\overline{x}-\mu}{\frac{\sigma}{\sqrt{n}}}\) and for two samples is z = \(\frac{(\overline{x_{1}}-\overline{x_{2}})-(\mu_{1}-\mu_{2})}{\sqrt{\frac{\sigma_{1}^{2}}{n_{1}}+\frac{\sigma_{2}^{2}}{n_{2}}}}\).
The p value helps to determine if the test results are statistically significant or not. In hypothesis testing, the null hypothesis can either be rejected or not rejected based on the comparison between the p value and the alpha level.
When the rejection region is only on one side of the distribution curve then it is known as one tail hypothesis testing. The right tail test and the left tail test are two types of directional hypothesis testing.
To get the alpha level in a two tail hypothesis testing divide \(\alpha\) by 2. This is done as there are two rejection regions in the curve.
Writing a hypothesis is one of the essential elements of a scientific research paper. It needs to be to the point, clearly communicating what your research is trying to accomplish. A blurry, drawn-out, or complexly-structured hypothesis can confuse your readers. Or worse, the editor and peer reviewers.
A captivating hypothesis is not too intricate. This blog will take you through the process so that, by the end of it, you have a better idea of how to convey your research paper's intent in just one sentence.
The first step in your scientific endeavor, a hypothesis, is a strong, concise statement that forms the basis of your research. It is not the same as a thesis statement , which is a brief summary of your research paper .
The sole purpose of a hypothesis is to predict your paper's findings, data, and conclusion. It comes from a place of curiosity and intuition . When you write a hypothesis, you're essentially making an educated guess based on scientific prejudices and evidence, which is further proven or disproven through the scientific method.
The reason for undertaking research is to observe a specific phenomenon. A hypothesis, therefore, lays out what the said phenomenon is. And it does so through two variables, an independent and dependent variable.
The independent variable is the cause behind the observation, while the dependent variable is the effect of the cause. A good example of this is “mixing red and blue forms purple.” In this hypothesis, mixing red and blue is the independent variable as you're combining the two colors at your own will. The formation of purple is the dependent variable as, in this case, it is conditional to the independent variable.
Types of hypotheses
Some would stand by the notion that there are only two types of hypotheses: a Null hypothesis and an Alternative hypothesis. While that may have some truth to it, it would be better to fully distinguish the most common forms as these terms come up so often, which might leave you out of context.
Apart from Null and Alternative, there are Complex, Simple, Directional, Non-Directional, Statistical, and Associative and casual hypotheses. They don't necessarily have to be exclusive, as one hypothesis can tick many boxes, but knowing the distinctions between them will make it easier for you to construct your own.
A null hypothesis proposes no relationship between two variables. Denoted by H 0 , it is a negative statement like “Attending physiotherapy sessions does not affect athletes' on-field performance.” Here, the author claims physiotherapy sessions have no effect on on-field performances. Even if there is, it's only a coincidence.
Considered to be the opposite of a null hypothesis, an alternative hypothesis is donated as H1 or Ha. It explicitly states that the dependent variable affects the independent variable. A good alternative hypothesis example is “Attending physiotherapy sessions improves athletes' on-field performance.” or “Water evaporates at 100 °C. ” The alternative hypothesis further branches into directional and non-directional.
A simple hypothesis is a statement made to reflect the relation between exactly two variables. One independent and one dependent. Consider the example, “Smoking is a prominent cause of lung cancer." The dependent variable, lung cancer, is dependent on the independent variable, smoking.
In contrast to a simple hypothesis, a complex hypothesis implies the relationship between multiple independent and dependent variables. For instance, “Individuals who eat more fruits tend to have higher immunity, lesser cholesterol, and high metabolism.” The independent variable is eating more fruits, while the dependent variables are higher immunity, lesser cholesterol, and high metabolism.
Associative and casual hypotheses don't exhibit how many variables there will be. They define the relationship between the variables. In an associative hypothesis, changing any one variable, dependent or independent, affects others. In a casual hypothesis, the independent variable directly affects the dependent.
Also referred to as the working hypothesis, an empirical hypothesis claims a theory's validation via experiments and observation. This way, the statement appears justifiable and different from a wild guess.
Say, the hypothesis is “Women who take iron tablets face a lesser risk of anemia than those who take vitamin B12.” This is an example of an empirical hypothesis where the researcher the statement after assessing a group of women who take iron tablets and charting the findings.
The point of a statistical hypothesis is to test an already existing hypothesis by studying a population sample. Hypothesis like “44% of the Indian population belong in the age group of 22-27.” leverage evidence to prove or disprove a particular statement.
Writing a hypothesis is essential as it can make or break your research for you. That includes your chances of getting published in a journal. So when you're designing one, keep an eye out for these pointers:
Outside of academia, hypothesis and prediction are often used interchangeably. In research writing, this is not only confusing but also incorrect. And although a hypothesis and prediction are guesses at their core, there are many differences between them.
A hypothesis is an educated guess or even a testable prediction validated through research. It aims to analyze the gathered evidence and facts to define a relationship between variables and put forth a logical explanation behind the nature of events.
Predictions are assumptions or expected outcomes made without any backing evidence. They are more fictionally inclined regardless of where they originate from.
For this reason, a hypothesis holds much more weight than a prediction. It sticks to the scientific method rather than pure guesswork. "Planets revolve around the Sun." is an example of a hypothesis as it is previous knowledge and observed trends. Additionally, we can test it through the scientific method.
Whereas "COVID-19 will be eradicated by 2030." is a prediction. Even though it results from past trends, we can't prove or disprove it. So, the only way this gets validated is to wait and watch if COVID-19 cases end by 2030.
Quick tips on writing a hypothesis
A hypothesis should instantly address the research question or the problem statement. To do so, you need to ask a question. Understand the constraints of your undertaken research topic and then formulate a simple and topic-centric problem. Only after that can you develop a hypothesis and further test for evidence.
Once you have your research's foundation laid out, it would be best to conduct preliminary research. Go through previous theories, academic papers, data, and experiments before you start curating your research hypothesis. It will give you an idea of your hypothesis's viability or originality.
Making use of references from relevant research papers helps draft a good research hypothesis. SciSpace Discover offers a repository of over 270 million research papers to browse through and gain a deeper understanding of related studies on a particular topic. Additionally, you can use SciSpace Copilot , your AI research assistant, for reading any lengthy research paper and getting a more summarized context of it. A hypothesis can be formed after evaluating many such summarized research papers. Copilot also offers explanations for theories and equations, explains paper in simplified version, allows you to highlight any text in the paper or clip math equations and tables and provides a deeper, clear understanding of what is being said. This can improve the hypothesis by helping you identify potential research gaps.
Variables are an essential part of any reasonable hypothesis. So, identify your independent and dependent variable(s) and form a correlation between them. The ideal way to do this is to write the hypothetical assumption in the ‘if-then' form. If you use this form, make sure that you state the predefined relationship between the variables.
In another way, you can choose to present your hypothesis as a comparison between two variables. Here, you must specify the difference you expect to observe in the results.
Now that everything is in place, it's time to write your hypothesis. For starters, create the first draft. In this version, write what you expect to find from your research.
Clearly separate your independent and dependent variables and the link between them. Don't fixate on syntax at this stage. The goal is to ensure your hypothesis addresses the issue.
After preparing the first draft of your hypothesis, you need to inspect it thoroughly. It should tick all the boxes, like being concise, straightforward, relevant, and accurate. Your final hypothesis has to be well-structured as well.
Research projects are an exciting and crucial part of being a scholar. And once you have your research question, you need a great hypothesis to begin conducting research. Thus, knowing how to write a hypothesis is very important.
Now that you have a firmer grasp on what a good hypothesis constitutes, the different kinds there are, and what process to follow, you will find it much easier to write your hypothesis, which ultimately helps your research.
Now it's easier than ever to streamline your research workflow with SciSpace Discover . Its integrated, comprehensive end-to-end platform for research allows scholars to easily discover, write and publish their research and fosters collaboration.
It includes everything you need, including a repository of over 270 million research papers across disciplines, SEO-optimized summaries and public profiles to show your expertise and experience.
If you found these tips on writing a research hypothesis useful, head over to our blog on Statistical Hypothesis Testing to learn about the top researchers, papers, and institutions in this domain.
1. what is the definition of hypothesis.
According to the Oxford dictionary, a hypothesis is defined as “An idea or explanation of something that is based on a few known facts, but that has not yet been proved to be true or correct”.
The hypothesis is a statement that proposes a relationship between two or more variables. An example: "If we increase the number of new users who join our platform by 25%, then we will see an increase in revenue."
A null hypothesis is a statement that there is no relationship between two variables. The null hypothesis is written as H0. The null hypothesis states that there is no effect. For example, if you're studying whether or not a particular type of exercise increases strength, your null hypothesis will be "there is no difference in strength between people who exercise and people who don't."
• Fundamental research
• Applied research
• Qualitative research
• Quantitative research
• Mixed research
• Exploratory research
• Longitudinal research
• Cross-sectional research
• Field research
• Laboratory research
• Fixed research
• Flexible research
• Action research
• Policy research
• Classification research
• Comparative research
• Causal research
• Inductive research
• Deductive research
• Your hypothesis should be able to predict the relationship and outcome.
• Avoid wordiness by keeping it simple and brief.
• Your hypothesis should contain observable and testable outcomes.
• Your hypothesis should be relevant to the research question.
• Null hypotheses are used to test the claim that "there is no difference between two groups of data".
• Alternative hypotheses test the claim that "there is a difference between two data groups".
A research question is a broad, open-ended question you will try to answer through your research. A hypothesis is a statement based on prior research or theory that you expect to be true due to your study. Example - Research question: What are the factors that influence the adoption of the new technology? Research hypothesis: There is a positive relationship between age, education and income level with the adoption of the new technology.
The plural of hypothesis is hypotheses. Here's an example of how it would be used in a statement, "Numerous well-considered hypotheses are presented in this part, and they are supported by tables and figures that are well-illustrated."
The red queen hypothesis in evolutionary biology states that species must constantly evolve to avoid extinction because if they don't, they will be outcompeted by other species that are evolving. Leigh Van Valen first proposed it in 1973; since then, it has been tested and substantiated many times.
The father of the null hypothesis is Sir Ronald Fisher. He published a paper in 1925 that introduced the concept of null hypothesis testing, and he was also the first to use the term itself.
You need to find a significant difference between your two populations to reject the null hypothesis. You can determine that by running statistical tests such as an independent sample t-test or a dependent sample t-test. You should reject the null hypothesis if the p-value is less than 0.05.
Varun Saharawat is a seasoned professional in the fields of SEO and content writing. With a profound knowledge of the intricate aspects of these disciplines, Varun has established himself as a valuable asset in the world of digital marketing and online content creation.
Hypothesis testing in statistics involves testing an assumption about a population parameter using sample data. Learners can download Hypothesis Testing PDF to get instant access to all information!
What exactly is hypothesis testing, and how does it work in statistics? Can I find practical examples and understand the different types from this blog?
Hypothesis Testing : Ever wonder how researchers determine if a new medicine actually works or if a new marketing campaign effectively drives sales? They use hypothesis testing! It is at the core of how scientific studies, business experiments and surveys determine if their results are statistically significant or just due to chance.
Hypothesis testing allows us to make evidence-based decisions by quantifying uncertainty and providing a structured process to make data-driven conclusions rather than guessing. In this post, we will discuss hypothesis testing types, examples, and processes!
Table of Contents
Hypothesis testing is a statistical method used to evaluate the validity of a hypothesis using sample data. It involves assessing whether observed data provide enough evidence to reject a specific hypothesis about a population parameter.
Hypothesis testing in data science is a statistical method used to evaluate two mutually exclusive population statements based on sample data. The primary goal is to determine which statement is more supported by the observed data.
Hypothesis testing assists in supporting the certainty of findings in research and data science projects. This statistical inference aids in making decisions about population parameters using sample data. For those who are looking to deepen their knowledge in data science and expand their skillset, we highly recommend checking out Master Generative AI: Data Science Course by Physics Wallah .
Also Read: What is Encapsulation Explain in Details
The hypothesis testing procedure in data science involves a structured approach to evaluating hypotheses using statistical methods. Here’s a step-by-step breakdown of the typical procedure:
Also Read: Binary Search Algorithm
Hypothesis testing is a fundamental concept in statistics that aids analysts in making informed decisions based on sample data about a larger population. The process involves setting up two contrasting hypotheses, the null hypothesis and the alternative hypothesis, and then using statistical methods to determine which hypothesis provides a more plausible explanation for the observed data.
Once these hypotheses are established, analysts gather data from a sample and conduct statistical tests. The objective is to determine whether the observed results are statistically significant enough to reject the null hypothesis in favor of the alternative.
Hypothesis testing is a cornerstone in statistical analysis, providing a framework to evaluate the validity of assumptions or claims made about a population based on sample data. Within this framework, several specific tests are utilized based on the nature of the data and the question at hand. Here’s a closer look at the three fundamental types of hypothesis tests:
The z-test is a statistical method primarily employed when comparing means from two datasets, particularly when the population standard deviation is known. Its main objective is to ascertain if the means are statistically equivalent.
A crucial prerequisite for the z-test is that the sample size should be relatively large, typically 30 data points or more. This test aids researchers and analysts in determining the significance of a relationship or discovery, especially in scenarios where the data’s characteristics align with the assumptions of the z-test.
The t-test is a versatile statistical tool used extensively in research and various fields to compare means between two groups. It’s particularly valuable when the population standard deviation is unknown or when dealing with smaller sample sizes.
By evaluating the means of two groups, the t-test helps ascertain if a particular treatment, intervention, or variable significantly impacts the population under study. Its flexibility and robustness make it a go-to method in scenarios ranging from medical research to business analytics.
The Chi-Square test stands distinct from the previous tests, primarily focusing on categorical data rather than means. This statistical test is instrumental when analyzing categorical variables to determine if observed data aligns with expected outcomes as posited by the null hypothesis.
By assessing the differences between observed and expected frequencies within categorical data, the Chi-Square test offers insights into whether discrepancies are statistically significant. Whether used in social sciences to evaluate survey responses or in quality control to assess product defects, the Chi-Square test remains pivotal for hypothesis testing in diverse scenarios.
Also Read: Python vs Java: Which is Best for Machine learning algorithm
Hypothesis testing is a fundamental concept in statistics used to make decisions or inferences about a population based on a sample of data. The process involves setting up two competing hypotheses, the null hypothesis H 0 and the alternative hypothesis H 1.
Through various statistical tests, such as the t-test, z-test, or Chi-square test, analysts evaluate sample data to determine whether there’s enough evidence to reject the null hypothesis in favor of the alternative. The aim is to draw conclusions about population parameters or to test theories, claims, or hypotheses.
In research, hypothesis testing serves as a structured approach to validate or refute theories or claims. Researchers formulate a clear hypothesis based on existing literature or preliminary observations. They then collect data through experiments, surveys, or observational studies.
Using statistical methods, researchers analyze this data to determine if there’s sufficient evidence to reject the null hypothesis. By doing so, they can draw meaningful conclusions, make predictions, or recommend actions based on empirical evidence rather than mere speculation.
R, a powerful programming language and environment for statistical computing and graphics, offers a wide array of functions and packages specifically designed for hypothesis testing. Here’s how hypothesis testing is conducted in R:
Hypothesis testing is an integral part of statistics and research, offering a systematic approach to validate hypotheses. Leveraging R’s capabilities, researchers and analysts can efficiently conduct and interpret various hypothesis tests, ensuring robust and reliable conclusions from their data.
Yes, data scientists frequently engage in hypothesis testing as part of their analytical toolkit. Hypothesis testing is a foundational statistical technique used to make data-driven decisions, validate assumptions, and draw conclusions from data. Here’s how data scientists utilize hypothesis testing:
Let’s delve into some common examples of hypothesis testing and provide solutions or interpretations for each scenario.
Scenario : A coffee shop owner believes that the average waiting time for customers during peak hours is 5 minutes. To test this, the owner takes a random sample of 30 customer waiting times and wants to determine if the average waiting time is indeed 5 minutes.
Hypotheses :
Solution : Using a t-test (assuming population variance is unknown), calculate the t-statistic based on the sample mean, sample standard deviation, and sample size. Then, determine the p-value and compare it with a significance level (e.g., 0.05) to decide whether to reject the null hypothesis.
Scenario : An e-commerce company wants to determine if changing the color of a “Buy Now” button from blue to green increases the conversion rate.
Solution : Split website visitors into two groups: one sees the blue button (control group), and the other sees the green button (test group). Track the conversion rates for both groups over a specified period. Then, use a chi-square test or z-test (for large sample sizes) to determine if there’s a statistically significant difference in conversion rates between the two groups.
The formula for hypothesis testing typically depends on the type of test (e.g., z-test, t-test, chi-square test) and the nature of the data (e.g., mean, proportion, variance). Below are the basic formulas for some common hypothesis tests:
Z-Test for Population Mean :
Z=(σ/n)(xˉ−μ0)
T-Test for Population Mean :
t= (s/ n ) ( x ˉ −μ 0 )
s = Sample standard deviation
Chi-Square Test for Goodness of Fit :
χ2=∑Ei(Oi−Ei)2
Also Read: Full Form of OOPS
While you can perform hypothesis testing manually using the above formulas and statistical tables, many online tools and software packages simplify this process. Here’s how you might use a calculator or software:
When using any calculator or software, always ensure you understand the underlying assumptions of the test, interpret the results correctly, and consider the broader context of your research or analysis.
What are the key components of a hypothesis test.
The key components include: Null Hypothesis (H0): A statement of no effect or no difference. Alternative Hypothesis (H1 or Ha): A statement that contradicts the null hypothesis. Test Statistic: A value computed from the sample data to test the null hypothesis. Significance Level (α): The threshold for rejecting the null hypothesis. P-value: The probability of observing the given data, assuming the null hypothesis is true.
The significance level (often denoted as α) is the probability threshold used to determine whether to reject the null hypothesis. Commonly used values for α include 0.05, 0.01, and 0.10, representing a 5%, 1%, or 10% chance of rejecting the null hypothesis when it's actually true.
The choice between one-tailed and two-tailed tests depends on your research question and hypothesis. Use a one-tailed test when you're specifically interested in one direction of an effect (e.g., greater than or less than). Use a two-tailed test when you want to determine if there's a significant difference in either direction.
The p-value is a probability value that helps determine the strength of evidence against the null hypothesis. A low p-value (typically ≤ 0.05) suggests that the observed data is inconsistent with the null hypothesis, leading to its rejection. Conversely, a high p-value suggests that the data is consistent with the null hypothesis, leading to no rejection.
No, hypothesis testing cannot prove a hypothesis true. Instead, it helps assess the likelihood of observing a given set of data under the assumption that the null hypothesis is true. Based on this assessment, you either reject or fail to reject the null hypothesis.
Grab free internships for freshers with Google, Infosys, Accenture, IITs, and top institutions for free. Work on real-world projects, upskill,…
Network monitoring keeps an overview of the network traffic for inside and outside areas and can also track bandwidth usage…
Network security involves measures to protect the integrity and functionality of your network and data. It ensures safe and secure…
Hypothesis testing is a fundamental statistical technique used to make inferences about populations based on sample data. This blog will guide you through the process of hypothesis testing, helping you understand and apply the concepts to solve similar assignments efficiently. By following this structured approach, you'll be able to solve your hypothesis testing homework problem with confidence.
Hypothesis testing involves making a decision about the validity of a hypothesis based on sample data. It comprises four key steps: defining hypotheses, calculating the test statistic, determining the p-value, and drawing conclusions. Let's explore each of these steps in detail.
The first step in hypothesis testing is to define the null and alternative hypotheses. These hypotheses represent the statements we want to test.
Null Hypothesis (H0)
The null hypothesis (H0) is a statement that there is no effect or difference. It serves as the default assumption that we aim to test against.
Alternative Hypothesis (Ha or H1)
The alternative hypothesis (Ha or H1) is a statement that indicates the presence of an effect or difference. It represents what we want to prove.
Depending on the direction of the hypothesis, we have three types of tests: left-tailed, right-tailed, and two-tailed tests.
Left-Tailed Test
A left-tailed test is used when we want to determine if the population mean is less than a specified value.
Right-Tailed Test
A right-tailed test is used when we want to determine if the population mean is greater than a specified value.
Two-Tailed Test
A two-tailed test is used when we want to determine if the population mean is different from a specified value, either higher or lower.
Consider a scenario where we want to test if the average vehicle price from a sample is less than $27,000. We would set up our hypotheses as follows:
Once the hypotheses are defined, the next step is to calculate the test statistic. The test statistic helps us determine the likelihood of observing the sample data under the null hypothesis.
The t-test statistic is calculated using the formula:
[ t = \frac{\bar{X} - \mu}{S / \sqrt{n}} ]
The denominator of the t-test formula, (S / \sqrt{n}), is known as the standard error (SE). It measures the variability of the sample mean.
Let's calculate the test statistic for our vehicle price example. Given:
First, we calculate the standard error (SE):
[ SE = \frac{S}{\sqrt{n}} = \frac{3488}{\sqrt{10}} \approx 1103 ]
Next, we calculate the test statistic (t):
[ t = \frac{25650 - 27000}{1103} \approx -1.2238 ]
The p-value is a critical component of hypothesis testing. It indicates the probability of obtaining a test statistic as extreme as the one observed, assuming the null hypothesis is true.
The method to calculate the p-value depends on the type of test (left-tailed, right-tailed, or two-tailed) and the direction of the alternative hypothesis.
For a left-tailed test, the p-value is calculated using the T.DIST() function in Excel.
For a right-tailed test, the p-value is calculated using the T.DIST.RT() function in Excel.
For a two-tailed test, the p-value is calculated using the T.DIST.2T() function in Excel. When the test statistic is negative, use the absolute value function (ABS()) to remove the negative sign before calculating the p-value.
For our vehicle price example with a left-tailed test, we calculate the p-value using the T.DIST() function in Excel:
[ \text{p-value} = T.DIST(-1.2238, 9, TRUE) \approx 0.1261 ]
The final step in hypothesis testing is to draw a conclusion based on the p-value and a pre-determined significance level ((\alpha)).
The significance level ((\alpha)) is the threshold for deciding whether to reject the null hypothesis. Common values for (\alpha) are 0.05, 0.01, 0.10, and 0.005.
For our vehicle price example with (\alpha = 0.05):
Since 0.1261 > 0.05, we fail to reject the null hypothesis. There is not enough evidence to suggest that the average vehicle price is less than $27,000.
To further illustrate hypothesis testing, let's explore three different scenarios: left-tailed test, right-tailed test, and two-tailed test.
In this example, we test if the average vehicle price is less than $27,000.
Step-by-Step Process
Define Hypotheses:
Calculate Test Statistic:
Determine P-Value:
Draw Conclusion:
In this example, we test if the average vehicle price is greater than $23,500.
In this example, we test if the average vehicle price is different from $23,500.
Successfully conducting hypothesis testing involves several critical steps. Here are some tips to help you perform hypothesis testing effectively.
Proper Data Collection
Accurate and reliable data collection is crucial for hypothesis testing. Ensure that your sample is representative of the population and collected using appropriate methods.
Random Sampling
Use random sampling techniques to avoid bias and ensure that your sample accurately represents the population.
Sample Size
Ensure that your sample size is large enough to provide reliable results. Larger sample sizes reduce the margin of error and increase the power of the test.
Hypothesis tests often rely on certain assumptions about the data. Verify these assumptions before proceeding with the test.
Many hypothesis tests, including the t-test, assume that the data follows a normal distribution. Use graphical methods (e.g., histograms, Q-Q plots) or statistical tests (e.g., Shapiro-Wilk test) to check for normality.
Independence
Ensure that the observations in your sample are independent of each other. Independence is a key assumption for most hypothesis tests.
Software tools like Excel , R , and SPSS can simplify the calculations involved in hypothesis testing and reduce the risk of errors.
Excel provides several functions for hypothesis testing, such as T.DIST(), T.DIST.RT(), and T.DIST.2T(). Use these functions to calculate p-values and make decisions based on your test statistics.
R is a powerful statistical software that offers various packages for hypothesis testing. Use functions like t.test() to perform t-tests and obtain p-values and confidence intervals.
Proper interpretation of the results is crucial for drawing accurate conclusions from hypothesis testing.
Statistical Significance
A statistically significant result (p-value < (\alpha)) indicates that there is strong evidence against the null hypothesis. However, it does not imply practical significance. Consider the context and the practical implications of the results.
Type I and Type II Errors
Be aware of the potential for Type I and Type II errors. A Type I error occurs when the null hypothesis is incorrectly rejected, while a Type II error occurs when the null hypothesis is not rejected despite being false. The significance level ((\alpha)) affects the probability of Type I errors, while the sample size and effect size influence the probability of Type II errors.
When reporting the results of hypothesis testing, include all relevant information to ensure transparency and reproducibility.
Detailed Description
Provide a detailed description of the hypotheses, test statistic, p-value, significance level, and the conclusion. This information helps others understand and evaluate your analysis.
Confidence Intervals
Include confidence intervals for the estimated parameters. Confidence intervals provide a range of plausible values for the population parameter and offer additional context for interpreting the results.
Hypothesis testing is a powerful tool, but it is essential to be aware of common pitfalls to avoid incorrect conclusions.
P-values indicate the probability of obtaining a test statistic as extreme as the one observed, assuming the null hypothesis is true. A small p-value suggests strong evidence against the null hypothesis, but it does not provide a measure of the effect size or practical significance.
P-Value Misconceptions
Avoid common misconceptions about p-values, such as believing that a p-value of 0.05 means there is a 5% chance that the null hypothesis is true. P-values do not measure the probability that the null hypothesis is true or false.
Ignoring the assumptions underlying hypothesis tests can lead to incorrect conclusions. Always verify the assumptions before proceeding with the test.
Assumption Violations
If the assumptions are violated, consider using alternative tests that do not rely on those assumptions. For example, if the data is not normally distributed, use non-parametric tests like the Wilcoxon rank-sum test or the Mann-Whitney U test.
Statistical significance does not imply practical significance. A result can be statistically significant but have a negligible practical effect. Always consider the context and practical implications of the results.
Effect Size
Report and interpret effect sizes alongside p-values. Effect sizes provide a measure of the magnitude of the observed effect and offer valuable context for interpreting the results.
Hypothesis testing is a critical tool in statistics for making inferences about populations based on sample data. By understanding the steps involved—defining hypotheses, calculating the test statistic, determining the p-value, and drawing conclusions—you can approach hypothesis testing with confidence.
Ensure proper data collection, verify assumptions, utilize software tools, interpret results carefully, and report findings transparently to enhance the reliability and validity of your hypothesis tests. By avoiding common pitfalls and considering both statistical and practical significance, you'll be well-equipped to tackle statistics homework and research projects effectively.
How to conduct hypothesis testing in statistics submit your homework, attached files.
File | Actions |
---|
Defining the hypothesis, the role of a hypothesis in the scientific method, types of hypotheses, hypothesis formulation, hypotheses and variables.
In sociology, as in other scientific disciplines, the hypothesis serves as a crucial building block for research. It is a central element that directs the inquiry and provides a framework for testing the relationships between social phenomena. This article will explore what a hypothesis is, how it is formulated, and its role within the broader scientific method. By understanding the hypothesis, students of sociology can grasp how sociologists construct and test theories about the social world.
A hypothesis is a specific, testable statement about the relationship between two or more variables. It acts as a proposed explanation or prediction based on limited evidence, which researchers then test through empirical investigation. In essence, it is a statement that can be supported or refuted by data gathered from observation, experimentation, or other forms of systematic inquiry. The hypothesis typically takes the form of an “if-then” statement: if one variable changes, then another will change in response.
In sociological research, a hypothesis helps to focus the investigation by offering a clear proposition that can be tested. For instance, a sociologist might hypothesize that an increase in education levels leads to a decrease in crime rates. This hypothesis gives the researcher a direction, guiding them to collect data on education and crime, and analyze the relationship between the two variables. By doing so, the hypothesis serves as a tool for making sense of complex social phenomena.
The hypothesis is a key component of the scientific method, which is the systematic process by which sociologists and other scientists investigate the world. The scientific method begins with an observation of the world, followed by the formulation of a question or problem. Based on prior knowledge, theory, or preliminary observations, researchers then develop a hypothesis, which predicts an outcome or proposes a relationship between variables.
Once a hypothesis is established, researchers gather data to test it. If the data supports the hypothesis, it may be used to build a broader theory or to further refine the understanding of the social phenomenon in question. If the data contradicts the hypothesis, researchers may revise their hypothesis or abandon it altogether, depending on the strength of the evidence. In either case, the hypothesis helps to organize the research process, ensuring that it remains focused and methodologically sound.
In sociology, this method is particularly important because the social world is highly complex. Researchers must navigate a vast range of variables—age, gender, class, race, education, and countless others—that interact in unpredictable ways. A well-constructed hypothesis allows sociologists to narrow their focus to a manageable set of variables, making the investigation more precise and efficient.
Sociologists use different types of hypotheses, depending on the nature of their research question and the methods they plan to use. Broadly speaking, hypotheses can be classified into two main types: null hypotheses and alternative (or research) hypotheses.
The null hypothesis, denoted as H0, states that there is no relationship between the variables being studied. It is a default assumption that any observed differences or relationships are due to random chance rather than a real underlying cause. In research, the null hypothesis serves as a point of comparison. Researchers collect data to see if the results allow them to reject the null hypothesis in favor of an alternative explanation.
For example, a sociologist studying the relationship between income and political participation might propose a null hypothesis that income has no effect on political participation. The goal of the research would then be to determine whether this null hypothesis can be rejected based on the data. If the data shows a significant correlation between income and political participation, the null hypothesis would be rejected.
The alternative hypothesis, denoted as H1 or Ha, proposes that there is a significant relationship between the variables. This is the hypothesis that researchers aim to support with their data. In contrast to the null hypothesis, the alternative hypothesis predicts a specific direction or effect. For example, a researcher might hypothesize that higher levels of education lead to greater political engagement. In this case, the alternative hypothesis is proposing a positive correlation between the two variables.
The alternative hypothesis is the one that guides the research design, as it directs the researcher toward gathering evidence that will either support or refute the predicted relationship. The research process is structured around testing this hypothesis and determining whether the evidence is strong enough to reject the null hypothesis.
The process of formulating a hypothesis is both an art and a science. It requires a deep understanding of the social phenomena under investigation, as well as a clear sense of what is possible to observe and measure. Hypothesis formulation is closely linked to the theoretical framework that guides the research. Sociologists draw on existing theories to generate hypotheses, ensuring that their predictions are grounded in established knowledge.
To formulate a good hypothesis, a researcher must identify the key variables and determine how they are expected to relate to one another. Variables are the factors or characteristics that are being measured in a study. In sociology, these variables often include social attributes such as class, race, gender, age, education, and income, as well as behavioral variables like voting, criminal activity, or social participation.
For example, a sociologist studying the effects of social media on self-esteem might propose the following hypothesis: “Increased time spent on social media leads to lower levels of self-esteem among adolescents.” Here, the independent variable is the time spent on social media, and the dependent variable is the level of self-esteem. The hypothesis predicts a negative relationship between the two variables: as time spent on social media increases, self-esteem decreases.
A strong hypothesis has several key characteristics. It should be clear and specific, meaning that it unambiguously states the relationship between the variables. It should also be testable, meaning that it can be supported or refuted through empirical investigation. Finally, it should be grounded in theory, meaning that it is based on existing knowledge about the social phenomenon in question.
You must be a member to access this content.
View Membership Levels
Mr Edwards has a PhD in sociology and 10 years of experience in sociological knowledge
Occupational classification refers to the systematic arrangement of occupations into categories based on various attributes, such as skill level, industry...
Multilevel Regression and Post-stratification (MRP) is a powerful statistical technique widely used in the social sciences for small area estimation....
Get the latest sociology.
How would you rate the content on Easy Sociology?
24 hour trending.
Functionalism: an introduction, robert merton’s strain theory explained, symbolic interactionism: understanding symbols, understanding the concept of ‘community’ in sociology.
Easy Sociology makes sociology as easy as possible. Our aim is to make sociology accessible for everybody. © 2023 Easy Sociology
© 2023 Easy Sociology
Run a free plagiarism check in 10 minutes, generate accurate citations for free.
Published on September 4, 2020 by Pritha Bhandari . Revised on June 22, 2023.
While descriptive statistics summarize the characteristics of a data set, inferential statistics help you come to conclusions and make predictions based on your data.
When you have collected data from a sample , you can use inferential statistics to understand the larger population from which the sample is taken.
Inferential statistics have two main uses:
Descriptive versus inferential statistics, estimating population parameters from sample statistics, hypothesis testing, other interesting articles, frequently asked questions about inferential statistics.
Descriptive statistics allow you to describe a data set, while inferential statistics allow you to make inferences based on a data set.
Using descriptive statistics, you can report characteristics of your data:
In descriptive statistics, there is no uncertainty – the statistics precisely describe the data that you collected. If you collect data from an entire population, you can directly compare these descriptive statistics to those from other populations.
Most of the time, you can only acquire data from samples, because it is too difficult or expensive to collect data from the whole population that you’re interested in.
While descriptive statistics can only summarize a sample’s characteristics, inferential statistics use your sample to make reasonable guesses about the larger population.
With inferential statistics, it’s important to use random and unbiased sampling methods . If your sample isn’t representative of your population, then you can’t make valid statistical inferences or generalize .
Since the size of a sample is always smaller than the size of the population, some of the population isn’t captured by sample data. This creates sampling error , which is the difference between the true population values (called parameters) and the measured sample values (called statistics).
Sampling error arises any time you use a sample, even if your sample is random and unbiased. For this reason, there is always some uncertainty in inferential statistics. However, using probability sampling methods reduces this uncertainty.
The characteristics of samples and populations are described by numbers called statistics and parameters :
Sampling error is the difference between a parameter and a corresponding statistic. Since in most cases you don’t know the real population parameter, you can use inferential statistics to estimate these parameters in a way that takes sampling error into account.
There are two important types of estimates you can make about the population: point estimates and interval estimates .
Both types of estimates are important for gathering a clear idea of where a parameter is likely to lie.
A confidence interval uses the variability around a statistic to come up with an interval estimate for a parameter. Confidence intervals are useful for estimating parameters because they take sampling error into account.
While a point estimate gives you a precise value for the parameter you are interested in, a confidence interval tells you the uncertainty of the point estimate. They are best used in combination with each other.
Each confidence interval is associated with a confidence level. A confidence level tells you the probability (in percentage) of the interval containing the parameter estimate if you repeat the study again.
A 95% confidence interval means that if you repeat your study with a new sample in exactly the same way 100 times, you can expect your estimate to lie within the specified range of values 95 times.
Although you can say that your estimate will lie within the interval a certain percentage of the time, you cannot say for sure that the actual population parameter will. That’s because you can’t know the true value of the population parameter without collecting data from the full population.
However, with random sampling and a suitable sample size, you can reasonably expect your confidence interval to contain the parameter a certain percentage of the time.
Your point estimate of the population mean paid vacation days is the sample mean of 19 paid vacation days.
Hypothesis testing is a formal process of statistical analysis using inferential statistics. The goal of hypothesis testing is to compare populations or assess relationships between variables using samples.
Hypotheses , or predictions, are tested using statistical tests . Statistical tests also estimate sampling errors so that valid inferences can be made.
Statistical tests can be parametric or non-parametric. Parametric tests are considered more statistically powerful because they are more likely to detect an effect if one exists.
Parametric tests make assumptions that include the following:
When your data violates any of these assumptions, non-parametric tests are more suitable. Non-parametric tests are called “distribution-free tests” because they don’t assume anything about the distribution of the population data.
Statistical tests come in three forms: tests of comparison, correlation or regression.
Comparison tests assess whether there are differences in means, medians or rankings of scores of two or more groups.
To decide which test suits your aim, consider whether your data meets the conditions necessary for parametric tests, the number of samples, and the levels of measurement of your variables.
Means can only be found for interval or ratio data , while medians and rankings are more appropriate measures for ordinal data .
test | Yes | Means | 2 samples |
---|---|---|---|
Yes | Means | 3+ samples | |
Mood’s median | No | Medians | 2+ samples |
Wilcoxon signed-rank | No | Distributions | 2 samples |
Wilcoxon rank-sum (Mann-Whitney ) | No | Sums of rankings | 2 samples |
Kruskal-Wallis | No | Mean rankings | 3+ samples |
Correlation tests determine the extent to which two variables are associated.
Although Pearson’s r is the most statistically powerful test, Spearman’s r is appropriate for interval and ratio variables when the data doesn’t follow a normal distribution.
The chi square test of independence is the only test that can be used with nominal variables.
Pearson’s | Yes | Interval/ratio variables |
---|---|---|
Spearman’s | No | Ordinal/interval/ratio variables |
Chi square test of independence | No | Nominal/ordinal variables |
Regression tests demonstrate whether changes in predictor variables cause changes in an outcome variable. You can decide which regression test to use based on the number and types of variables you have as predictors and outcomes.
Most of the commonly used regression tests are parametric. If your data is not normally distributed, you can perform data transformations.
Data transformations help you make your data normally distributed using mathematical operations, like taking the square root of each value.
1 interval/ratio variable | 1 interval/ratio variable | |
2+ interval/ratio variable(s) | 1 interval/ratio variable | |
Logistic regression | 1+ any variable(s) | 1 binary variable |
Nominal regression | 1+ any variable(s) | 1 nominal variable |
Ordinal regression | 1+ any variable(s) | 1 ordinal variable |
If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.
Methodology
Research bias
Descriptive statistics summarize the characteristics of a data set. Inferential statistics allow you to test a hypothesis or assess whether your data is generalizable to the broader population.
A statistic refers to measures about the sample , while a parameter refers to measures about the population .
A sampling error is the difference between a population parameter and a sample statistic .
Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses , by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.
If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.
Bhandari, P. (2023, June 22). Inferential Statistics | An Easy Introduction & Examples. Scribbr. Retrieved September 18, 2024, from https://www.scribbr.com/statistics/inferential-statistics/
Other students also liked, parameter vs statistic | definitions, differences & examples, descriptive statistics | definitions, types, examples, hypothesis testing | a step-by-step guide with easy examples, what is your plagiarism score.
COMMENTS
Depending on the population distribution, you can classify the statistical hypothesis into two types. Simple Hypothesis: A simple hypothesis specifies an exact value for the parameter. Composite Hypothesis: A composite hypothesis specifies a range of values. Example: A company is claiming that their average sales for this quarter are 1000 units.
Present the findings in your results and discussion section. Though the specific details might vary, the procedure you will use when testing a hypothesis will always follow some version of these steps. Table of contents. Step 1: State your null and alternate hypothesis. Step 2: Collect data. Step 3: Perform a statistical test.
The null hypothesis (H0) answers "No, there's no effect in the population.". The alternative hypothesis (Ha) answers "Yes, there is an effect in the population.". The null and alternative are always claims about the population. That's because the goal of hypothesis testing is to make inferences about a population based on a sample.
5 Steps of Significance Testing. Hypothesis testing involves five key steps, each critical to validating a research hypothesis using statistical methods: Formulate the Hypotheses: Write your research hypotheses as a null hypothesis (H 0) and an alternative hypothesis (H A). Data Collection: Gather data specifically aimed at testing the ...
In hypothesis testing, the goal is to see if there is sufficient statistical evidence to reject a presumed null hypothesis in favor of a conjectured alternative hypothesis. The null hypothesis is usually denoted H0 while the alternative hypothesis is usually denoted H1. An hypothesis test is a statistical decision; the conclusion will either be ...
There are two types of statistical hypotheses: The null hypothesis, denoted as H 0, is the hypothesis that the sample data occurs purely from chance. The alternative hypothesis, denoted as H 1 or H a, is the hypothesis that the sample data is influenced by some non-random cause. Hypothesis Tests. A hypothesis test consists of five steps: 1.
5.2 - Writing Hypotheses. The first step in conducting a hypothesis test is to write the hypothesis statements that are going to be tested. For each test you will have a null hypothesis (H 0) and an alternative hypothesis (H a). When writing hypotheses there are three things that we need to know: (1) the parameter that we are testing (2) the ...
S.3 Hypothesis Testing. In reviewing hypothesis tests, we start first with the general idea. Then, we keep returning to the basic procedures of hypothesis testing, each time adding a little more detail. The general idea of hypothesis testing involves: Making an initial assumption. Collecting evidence (data).
5. Phrase your hypothesis in three ways. To identify the variables, you can write a simple prediction in if…then form. The first part of the sentence states the independent variable and the second part states the dependent variable. If a first-year student starts attending more lectures, then their exam scores will improve.
2. Photo from StepUp Analytics. Hypothesis testing is a method of statistical inference that considers the null hypothesis H ₀ vs. the alternative hypothesis H a, where we are typically looking to assess evidence against H ₀. Such a test is used to compare data sets against one another, or compare a data set against some external standard.
Hypothesis testing is a crucial procedure to perform when you want to make inferences about a population using a random sample. These inferences include estimating population properties such as the mean, differences between means, proportions, and the relationships between variables. This post provides an overview of statistical hypothesis testing.
The Four Steps in Hypothesis Testing. STEP 1: State the appropriate null and alternative hypotheses, Ho and Ha. STEP 2: Obtain a random sample, collect relevant data, and check whether the data meet the conditions under which the test can be used. If the conditions are met, summarize the data using a test statistic.
13 Different Types of Hypothesis. There are 13 different types of hypothesis. These include simple, complex, null, alternative, composite, directional, non-directional, logical, empirical, statistical, associative, exact, and inexact. A hypothesis can be categorized into one or more of these types. However, some are mutually exclusive and ...
HYPOTHESIS TESTING. A clinical trial begins with an assumption or belief, and then proceeds to either prove or disprove this assumption. In statistical terms, this belief or assumption is known as a hypothesis. Counterintuitively, what the researcher believes in (or is trying to prove) is called the "alternate" hypothesis, and the opposite ...
The actual test begins by considering two hypotheses.They are called the null hypothesis and the alternative hypothesis.These hypotheses contain opposing viewpoints. H 0, the —null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.
Statistical Hypothesis . A statistical hypothesis is a hypothesis that can be verified to be plausible on the basis of statistics. By using data sampling and statistical knowledge, one can determine the plausibility of a statistical hypothesis and find out if it stands true or not. (Related blog: z-test vs t-test) Performing Hypothesis Testing
Types of Hypothesis. Types of Hypothesis are as follows: Research Hypothesis. A research hypothesis is a statement that predicts a relationship between variables. It is usually formulated as a specific statement that can be tested through research, and it is often used in scientific research to guide the design of experiments. ... Statistical ...
Hypothesis tests # Formal hypothesis testing is perhaps the most prominent and widely-employed form of statistical analysis. It is sometimes seen as the most rigorous and definitive part of a statistical analysis, but it is also the source of many statistical controversies. The currently-prevalent approach to hypothesis testing dates to developments that took place between 1925 and 1940 ...
Hypothesis testing is a tool for making statistical inferences about the population data. It is an analysis tool that tests assumptions and determines how likely something is within a given standard of accuracy. Hypothesis testing provides a way to verify whether the results of an experiment are valid. A null hypothesis and an alternative ...
Categorical variables represent groupings of things (e.g. the different tree species in a forest). Types of categorical variables include: Ordinal: represent data with an order (e.g. rankings). Nominal: represent group names (e.g. brands or species names). Binary: represent data with a yes/no or 1/0 outcome (e.g. win or lose).
Different Types of Hypotheses ... Statistical hypothesis. The point of a statistical hypothesis is to test an already existing hypothesis by studying a population sample. Hypothesis like "44% of the Indian population belong in the age group of 22-27." leverage evidence to prove or disprove a particular statement.
Here's a closer look at the three fundamental types of hypothesis tests: 1. Z-Test: The z-test is a statistical method primarily employed when comparing means from two datasets, particularly when the population standard deviation is known. Its main objective is to ascertain if the means are statistically equivalent.
Alternative Hypothesis (Ha or H1) The alternative hypothesis (Ha or H1) is a statement that indicates the presence of an effect or difference. It represents what we want to prove. Types of Tests. Depending on the direction of the hypothesis, we have three types of tests: left-tailed, right-tailed, and two-tailed tests. Left-Tailed Test
A well-constructed hypothesis allows sociologists to narrow their focus to a manageable set of variables, making the investigation more precise and efficient. Types of Hypotheses. Sociologists use different types of hypotheses, depending on the nature of their research question and the methods they plan to use.
Hypothesis testing. Hypothesis testing is a formal process of statistical analysis using inferential statistics. The goal of hypothesis testing is to compare populations or assess relationships between variables using samples. Hypotheses, or predictions, are tested using statistical tests. Statistical tests also estimate sampling errors so that ...