contents page in dissertation

Microsoft Word for Dissertations

Introduction, Template, & Resources
Formatting for All Readers
Applying a Style
Modifying a Style
Setting up a Heading 1 Example
Images, Charts, Other Objects
Footnotes, Endnotes, & Citations
Cross-References
Appendix Figures & Tables
Table of Contents
List of Figures/Tables
Chapter and Section Numbering
Page Numbers
Landscape Pages
Combining Chapter Files
Commenting and Reviewing
Tips & Tricks
The Two-inch Top Margin
Troubleshooting
Finalizing Without Styles
Preparing Your Final Document
Take a break

Automatic Table of Contents

An automatic Table of Contents relies on Styles to keep track of page numbers and section titles for you automatically. Microsoft Word can scan your document and find everything in the Heading 1 style and put that on the first level of your table of contents, put any Heading 2’s on the second level of your table of contents, and so on.

If you want an automatic table of contents you need to apply the Heading 1 style to all of your chapter titles and front matter headings (like “Dedication” and “Acknowledgements”). All section headings within your chapters should use the Heading 2 style. All sub-section headings should use Heading 3 , etc....

If you have used Heading styles in your document, creating an automatic table of contents is easy.

Place your cursor where you want your table of contents to be.
On the References Ribbon, in the Table of Contents Group , click on the arrow next to the Table of Contents icon, and select Custom Table of Contents .
We suggest that you set each level (Chapters, sections, sub-sections, aka TOC 1, TOC 2, TOC 3) to be single-spaced, with 12 points of space afterwards. This makes each item in your ToC clump together if they're long enough to wrap to a second line, with the equivalent of a double space between each item, and makes the ToC easier to read and understand than if every line were double-spaced. See the video below for details.
If you want to change which headings appear in your Table of Contents, you can do so by changing the number in the Show levels: field. Select "1" to just include the major sections (Acknowledgements, List of Figures, Chapters, etc...). Select "4" to include Chapters, sections, sub-sections, and sub-sub-sections.
Click OK to insert your table of contents.

The table of contents is a snapshot of the headings and page numbers in your document, and does not automatically update itself as you make changes. At any time, you can update it by right-clicking on it and selecting Update field . Notice that once the table of contents is in your document, it will turn gray if you click on it. This just reminds you that it is a special field managed by Word, and is getting information from somewhere else.

Modifying the format of your Table of Contents

The video below shows how to make your Table of Contents a little easier to read by formatting the spacing between items in your Table of Contents. You may recognize the "Modify Style" window that appears, which can serve as a reminder that you can use this window to modify more than just paragraph settings in the ToC. You can modify the indent distance, or font, or tab settings for your ToC, just the same as you may have modified it for Styles.

an image of the Modify Table of Contents window, where you can set Show Levels

By default, the Table of Contents tool creates the ToC by pulling in Headings 1 through 3. If you'd like to modify that -- to only show H1's, or to show Headings 1 through 4 -- then go to the References tab and select Custom Table of Contents . In the window that appears, set Show Levels to "1" to only show Heading 1's in the Table of Contents, or set it to "4" to show Headings 1 through 4.

Bonus tip for updating fields like the Table of Contents

You'll quickly realize that all of the automatic Lists and Tables need to be updated occasionally to reflect any changes you've made elsewhere in the document -- they do not dynamically update by themselves. Normally, this means going to each field, right-clicking on it and selecting "Update Field".

Alternatively, to update all fields throughout your document (Figure/Table numbers & Lists, cross-references, Table of Contents, etc...), just select "Print". This will usually cause Word to update everything in anticipation of printing. Once the print preview window appears, just cancel and double-check that it updated things.

<< Previous: Appendix Figures & Tables
Next: List of Figures/Tables >>

Thesis and Dissertation Guide

« Thesis & Dissertation Resources
The Graduate School Home

Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

Non-Traditional Formats
Font Type and Size
Spacing and Indentation
Tables, Figures, and Illustrations
Formatting Previously Published Work
Internet Distribution
Open Access
Registering Copyright
Using Copyrighted Materials
Use of Your Own Previously Published Materials
Submission Steps
Submission Checklist
Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

Dedication, Acknowledgements, and Preface (each optional)
Table of Contents, with page numbers
List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
List of Abbreviations (if applicable)
List of Symbols (if applicable)
Introduction, if any
Main body, with consistent subheadings as appropriate
Appendices (if applicable)
Endnotes (if applicable)
References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

Title Page with mesaurements described in surrounding text

The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
The words “Chapel Hill” must be centered 1″ below the statement.
One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

Copyright Page with mesaurements described in surrounding text

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

Abstract page with mesaurements described in surrounding text

Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

Dedication page with mesaurements described in surrounding text

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

Do not place a heading on the dedication page.
The text of short dedications must be centered and begin 2″ from the top of the page.
Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
Subsequent pages of text return to the 1″ top margin.
The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

Table of Contents page with mesaurements described in surrounding text

Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
Include one double-spaced line between the heading and the first entry.
The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
Include one double-spaced line between each entry.
Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

Lists of Figures page with mesaurements described in surrounding text

Include the heading(s) in all capital letters, centered 1″ below the top of the page.
Each entry must include a number, title, and page number.
Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

List of Abbreviations with mesaurements described in surrounding text

Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
Arrange your abbreviations alphabetically.
Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
If an entry takes up more than one line, single-space between the two lines.
The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

How it works

"Christmas Offer"

Terms & conditions.

As the Christmas season is upon us, we find ourselves reflecting on the past year and those who we have helped to shape their future. It’s been quite a year for us all! The end of the year brings no greater joy than the opportunity to express to you Christmas greetings and good wishes.

At this special time of year, Research Prospect brings joyful discount of 10% on all its services. May your Christmas and New Year be filled with joy.

We are looking back with appreciation for your loyalty and looking forward to moving into the New Year together.

"Claim this offer"

In unfamiliar and hard times, we have stuck by you. This Christmas, Research Prospect brings you all the joy with exciting discount of 10% on all its services.

Offer valid till 5-1-2024

We love being your partner in success. We know you have been working hard lately, take a break this holiday season to spend time with your loved ones while we make sure you succeed in your academics

Discount code: RP0996Y

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read: The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

You would need to right-click on one of the styles to open a drop-down menu.

Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read: What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
Table of Contents and the Abstract pages are not to contain any numbers.
The remaining pages would carry the standard page numbers (1,2,3…).
The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

To do so, click on the bottom of the page you want before the Table of Contents.
Open the ‘Insert’ tab and select ‘Page Break’.
This will create a page between the top and bottom sections of the Table of Contents area.

Generating-Table-of-Contents-for-Your-Dissertation

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

Place the cursor where you want to place the Table of Contents on the page you added earlier.
On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a table of contents sample.

You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

Select ‘Update Table’ in the References tab.
This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal , full dissertation paper , or individual chapters .